28ProblemPossible CausesWhat To DoOven not clean afterOven controls not See the Using the self-cleaning oven section.a clean cycleproperly set. Oven was heavily soiled. Clean up heavy spillovers before starting the clean cycle. Heavily soiled ovens may need to self-clean again or for a longer period of time.Oven makes This is the sound of the This is normal.clicking noiseheating element turning off and on during cooking functions.CLEAN light is onThe oven door was Turn the Oven Temperature knob to OFF. Allow thewhen you want to cookaccidentally locked.oven to cool. Then move the latch to the far left. Never force the door latch handle.F and a number You have a function Turn the Oven Temperature knob to OFF. Put the oven or letter flash in error code.back into operation.If the function code repeats. Disconnect all power to the range for at least 30 seconds and then reconnect power. If the function error code repeats, call for service.The display goes blank Power surge. Disconnect power at the fuse box or circuit breakeror indicator lights comefor at least 10 seconds. Turn power on and power on when range is notup your range. If the indicator lights are still on, in usecall for service.The clock is in the See the Using the clock and timer section.black-out mode.Oven door will Oven too hot. Turn the Oven Temperature knob to CLEAN. not lockThe glowing oven cleaning light after the knob is turned indicates the oven is too hot from previous use. To cool the oven, open the door wide, and allowthe oven to cool. After the oven has cooled, close the door and slide the latch handle all the way to the right.Burning or oilyThis is normal in a new To speed the process, set a self-clean cycle odor emitting fromoven and will disappear for a minimum of 3 hours. See the Using thethe ventin time. self-cleaning oven section.Strong odorAn odor from the insulation This is temporary.around the inside of the oven is normal for the first few times the oven is used.Troubleshooting TipsBefore you call for service