Page 8 of 44 3. Follow the instructions to finish the driver installation.** Restart your computer for the new hardware and settings to take effect. 4. After your computer restarts, you may plug your camera into the USB port.*Note: If Autorun does not start, choose Run from the Windows Start Menu. Assuming your CD-ROM drive is the D drive, type “d:\Autorun” in theRun dialog box. If Autorun still does not start, consult your computer manual or manufacturer to locate the CD-ROM drive. **Note: On Windows 2000, Windows Media Player will be installed after the bundled software is installed. Make sure if you are running Windows 2000, you wait for the Windows Media Player installation to finish. Note: Veo Creative Studio must have DirectX installed to operate properly (pre-installed in Windows XP). You will be prompted to install DirectX upon initial use of the Creative Studio software. Please install and restart your computer to complete the installation. How to connect your Veo Web Camera to your computerIf you have the Mobile Connect, connect the USB cable to the camera first.
Guru