20 Most Recent Zanussi ZWF12070 Front Load Washer - Page 6 Questions & Answers

Ed4 - means: Relay that switches the power between the washing and drying heating element (in the WD PCB). Could be: Wiring faulty; Electrical current leak between heating element and ground; WD board faulty; Main PCB faulty When this malfunction occurs the cycle stops with door open. Dado

Got a zanuzzoe Electrolux. Aqua cycle filter button is orange won't reset

Oxi clean sells a washing machine cleaner deodarizer which I recommend.If you cant find it locally amazon has it for 7$ and change.Enter washing machine cleaner deodorizer in search bar and multiple products will appear oxi being the lowest price.Remember to follow instructions.

C25 isnt an error code. This is just a software code that shows up during test mode

This error means the washing machine door will not open promptly or might not open at all. It could be caused by a number of potential issues from wiring faults to damage to the door lock..

A "Delayed Start" may have been programmed. Turn the Selector to OFF, this will cancel the Delay Start and machine will start normally . Don't attempt to open the door if water still present or heat. A wait of 3 minutes necessary before door will open Try "PAUSE" and then OFF if machine is balking.