http://www.fixya.com/support/p127659-ge_monogram_zdi15c_automatic_icemakerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comFri, 25 Dec 2009 13:51:50 GMT80http://www.fixya.com/support/t3312792-ge_monogram_m_n_zd1s15cssj_r_ns_nGE Monogram m/n ZD1S15CSSJ S/N VG930101 ICE CUTTER IS NOT STAYING HOT ENOUGH TO CREATE CUBES. THE SHEET OF ICE BEGINS TO BE SLICED BY THE TOP LAYER, BUT THEN IT STOPS.THEN THE CYCLE BEGINS AGAIN, AND ANOTHER SHEET OF ICE IS DEPOSITED , THEN THE WATER...Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t3608912-ice_maker_isnt_working_water_coming_outice maker isnt working and water is coming out slowly for drinkingFri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t3589233-not_make_enough_iceGE Monogram does not make enouh ice for an evenings use - even when quick ice feature is used. I do not understand which part shuts off the ice when it is at maximum capacity or how it works.Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t3519375-use_clean_calcium_deposits_inWhat do I use to clean the calcium deposits in the ice maker? The note inside the machine says to use a bottle of Nickel safe ice machine cleaner by Nu Calgon.....Home Depot doesn't have it....Target doesn't either....any suggestions? What can I...Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t3490357-ge_monogram_fridge_fridge_top_freezerGE MONOGRAM FRIDGE. FRIDGE TOP FREEZER BOTTOM. COMPRESSOR IS HOT, EXTERIOR BETWEEN FRIDGE AND FREEZER IS HOT. WHAT'S WRONG?Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t3227163-freezer_door_in_ge_monogram_gets_frozenfreezer door in my ge monogram gets frozen shut and won't openFri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t3206686-ge_ice_maker_cycles_but_no_waterGE Ice maker cycles but no water to machine. I unplugged the solenoid valve and ran a line cord to the solenoid.I plugged it in and the valve opens and water goes to the ice maker. Apparently Ice maker is not sending power to the solenoid valve when...Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t2887742-replacement_ice_maker_solenoid_in_doorMy in door ice maker solenoid needs to be replaced. I have the part (appliance guru), but I'm not sure how to access and remove the current solenoid. Is their a manual showing how to access the old part in trhe side by side freezer door?Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t2840516-voltage_going_cutter_assemblywhat voltage is going to the cutter assembly. I'm not sure my cutter is getting hot enough to cut the ice into cubesFri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t2817283-ice_maker_water_over_floow_in_freezerice maker water over floow in freezer and railes become icey and we can not open the freezerFri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t1647555-water_freezes_slab_builds_up_will_notThe water flow over the slab and it keeps freezing and builds up to 2 Inch block of ice on slab.and wont slide off onto the wiresFri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t1967115-replaced_water_valve_but_still_makesLast year it was making a chugging sound and making very thin ice - called a GE guy out and he said we needed to replace the water intake valve - we did and solved the problem until this month and it started making the chugging sound and limited ice....Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t2540187-loud_churning_noise_ice_not_droppingSomeone suggested it needed cleaning, which it did, but noise and lack of ice persisting after cleaning.Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t2712963-need_water_valve_monogram_zd115_iceI need a water valve for a Monogram zd115 Ice maker. Where should I buy one. and what about a part number??Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t2657205-ge_ice_maker_getting_hotIt seems that our ice maker started to produce a lot more heat than it used to. I have checked any lint build up and I clean the unit on a regular basis. The copper pipes which run through the air cooling unit are pretty hot. Ever since this happened...Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t2657921-ge_icemaker_stopped_making_iceGE ZDIS15CSSL icemaker stopped making ice. everything else in machine appears to be working fine. I cleaned coils, ran cleaning function with solution. Water container fills with water, it's cold, just no ice. It's like the water isn't getting from...Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t2416645-did_cleaning_cycle_afterwards_turneddid a cleaning cycle and afterwards turned the unit on, however when the on cycle is depressed the cleaning light comes on and it begins to both make ice and clean. The condencer runs but not enougth water is introduced to the tray to be pumped.Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t2375711-ge_monogram_ice_maker_makes_loudGe monogram ice maker makes loud churning noise. Any suggestionsFri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t2382822-ice_maker_need_pump_or_built_indoes this ice maker need a pump or is it built in zdis15cssFri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t2370808-determined_problem_water_pumpJust did what I know and determined the problem is the water pump. I read some where, I think, they are some $300 for a replacement. Anyone know how much they can be or where I can get one.....Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t2340251-mine_making_huge_slab_ice_becomesMine is making a huge slab of ice that becomes stuck on the plate...what is the mechanism that knows when to stop cooling? I runs till theres no more water to pump up to the plate.Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t2312837-ge_monogram_ice_maker_makes_ice_unitThe ice is being produced, however the ice box only gets to around 46 degrees, everything appears to run correctly.Fri, 25 Dec 2009 13:51:50 GMThttp://www.fixya.com/support/t2148117-ge_monogram_ice_maker_zdis15_ran_cleanGE Monogram Ice Maker ZDIS15...ran a clean cycle, now the water does not cycle to the freezing plate. The freezing plate gets acceptably cold, just does not cycle water. Would the root cause be the pump in the reservoir, or the solenoid/water valve...Fri, 25 Dec 2009 13:51:50 GMT