20 Most Recent
Hampton Bay 52 In. Brushed Nickel Romano with Integrated Pan Style Light Kit Fan Questions & Answers
HAMPTON BAY CEILING FAN MODEL # UC7067RC
I have a solution for you. Call 1-866-600-FANS(3267) and give them the numbers on the side of the receiver. Example: 7067FM-22 (6+5) Variations of this receiver are used by many different manufacturers including Hampton Bay,Emerson,Minka Aire, etc... There is a web site that shows a few examples of this receiver available. http://www.fanmanlighting.com
P.S. It helps to know if your Ceiling Fan has a 2nd light above the fan or reverses direction from the transmitter.
I need parts this fan
Hi there:
You directed this question at me, but unfortunately this isn't my expertise and I am unable to
provide you with a real solution at this time.
Hopefully one of other experts will be able to
provide you with a real solution.
Thank you for using FixYa
I have my fan hampton
You need to take the light kit back and let them know what fan you have , so they can show you the ones that will fit it.
How do you change the light bulb??
can you post a picture of the light kit? there are over 100 light kits for the fan i think i know which one you have but am not sure, is there 3 small screws on the side of the light kit? if there is remove them and the light cover will com off to get acces to the blub.
I cant figure out how
Hello,
Try pulling the globe straight down. I believe that this model has spring loaded clips holding the globe on the base.
--W/D--
I bought a 3 ceiling fans, i dont find the boxes
The code switches are very small two position slide switches. Start with one fan and open the handheld fan controller. You will see the small slide switches that set the code, they may be in the battery compartment and do not look like typical switches. However you set the code on the hand held, you need to set the same code on the fan itself. The switches on the fan are usually in the motor cage and will look very similar to the hand held switches.
Set new codes in one fan and set another code on one of the others. The third fan should be fine.
Please message me if you have problems doing this.
Not finding what you are looking for?