Top 20 Micrografx Designer 9 Full Version for PC Questions & Answers


Close Designer 9.
Open the folder containing the 'DSF' file.
Try to copy the file into a different folder, or onto a USB memory-stick.
Do you still get the same error-message?
If so, then the problem is that your disk-drive has a problem;
your problem is _not_ a problem with the Designer 9 software.

Your disk-drive could be "dying". Backup all your important files.
Consider replacing the disk-drive, before it COMPLETELY fails.

Micrografx... | 206 views | 0 helpful votes


Press the F1 function key whilst using Excel and the help files will guide you.

Computers &... | 8,886 views | 0 helpful votes


Well, this is puzzling because all the drivers on the Steel Series 3GC site are for Windows 7 or above. The site doesn't even list the model you just purchased nor the 3.7 version of driver (which appears to be available from Softpedia rather than Steel.) 3.7 purportedly works for XP but I have seen advice suggesting that no devices other than keyboard and mouse ought to be connected to the USB ports during its installation. Uninstall the driver, reboot, install the driver again without the device being connected. I would even reboot it then, before connecting the controller. Perhaps subsequent connection of the controller will be recognized. Go into Device Manager and see if it is then recognized in the USB listings. If there is no exclamation point there beside the driver, you may have gotten lucky.

Computers &... | 8,256 views | 1 helpful votes


You have most likely hdd errors and the programme to be uninstalled is fragmented or damaged.
Try running chkdsk/f as you are on the old system.

Computers &... | 3,232 views | 0 helpful votes


How old is the laser mouse? Should you get another one?

Computers &... | 1,828 views | 0 helpful votes


Could be Geoblocking !! Try Another VPN (Trial) Hope This Helps !! Donald Deane MCSE,ASE,CPO also more (INFO) !! Im Here to Help !!

Computers &... | 617 views | 0 helpful votes


download links for anything widows is XP is no longer supported
you need your computer to have the sp3 pack fully installed

getting audio to work on this issue
as you have uncounted is a world wide problem

kb888111xp2.exe ..today is closed .i cant find it

you may be restricted to audio drivers for the mercury mother board or if the sound card came with a driver disc use that

http://www.driverguide.com/driver/company/Mercury/Sound-Audio/index.html
index-my03d2hjlayigo0mp4bzvuuy-2-0_0.jpg

Computers &... | 12,230 views | 0 helpful votes


a bit fuzzy here in your statements
you have win xp installed and the quicken program runs there perfectly
is that correct ?
now on another pc you have win vista and quicken is not running there
is that correct?
or do you have both win xp and vista operating systems on the one laptop and are trying to get quicken to work on both on the one laptop
maybe the problem is that quicken version you have works well win win xp as it is compatible with that OS but is not compatible with win vista in which case you need to go to the quicken properties tab , click on compatibility tab and tick the box and high light window vista and apply the change or get a download upgrade vesion from quicken web site

Computers &... | 404 views | 0 helpful votes


Talk to uk2.net

Computers &... | 11,381 views | 0 helpful votes


When You Insert your SD card into the internal card reader, then the SD card is not recognised by the system and the SD card drive doesn't show there. The problem can be because of driver issue, system issue and device issue.
To fix the problem you need to go at device manager if there is a yelllow sign in SD card controller, the problem is most probably caused by a driver issue. Then you need to update the driver. You can also download the driver for your card reader.
Also, check if your SD Card is broken. You can also check it into different devices port.
If it is detected then you can backup of your data.

If the problem not resolved by any means and you require you SD Card data then I will suggest you read - https://www.stellarinfo.co.in/services/removable-media-recovery.php

Computers &... | 14,566 views | 1 helpful votes


Call at Sbcglobal toll-free number 1-844-819-3386 to get instant support. Sbcglobal Customer Services Number enables you to rapidly get associated with their guaranteed specialist and let them know the correct issue. The best some portion of administration is that their experts investigate and settle the issue in the meantime.

Visit here for more detail:- http://www.itphonenumber.com/sbcglobal-customer-service

sbcglobal technical support 1-dxnkxpl1ihhefi52cw5m1web-5-0.jpg

Computers &... | 1,058 views | 1 helpful votes


If you have access to another computer you can make a bootable USB using the files from the CDs (assuming we are speaking of a bootable image file on the CDs).
If you have the Windows Backup that you created from the previous computer, that you will not be able to deploy on the new computer due to the changes in the hardware. This is most likely the reason that you get the BSOD.

Hope that helped.

Computers &... | 421 views | 0 helpful votes


I am going to suggest if it's only 3 months old you should take it back to where you bought it. Mine quit working right a few weeks after I bought it and they gave me a new one. Be sure you take your receipt with you. Even new things can mess up.

Computers &... | 12,745 views | 0 helpful votes


Assuming that you are using one, take the batteries out of the remote, then turn the sound up with the switches on the monitor. Tactile switches somethings get stuck. The mute switch could be one of them. If it is the one on the screen, check the "feel" of the mute button compared to the others. Damaged ones usually feel "flat".

Computers &... | 247 views | 0 helpful votes


then use the ubuntu operating system full time
win xp is no longer being serviced by microsoft so patches to get different drivers to install or work are no longer being upgraded
Time to install win 7 or stay with the better os from linux

Computers &... | 242 views | 0 helpful votes


Replace the drive if it has not become unplugged.

Computers &... | 431 views | 0 helpful votes


Contact Magic jack support staff on this problem.

Computers &... | 269 views | 0 helpful votes


Try disabling the network adapter in the bios and removing any network adapter in device manager in Windows
Then reboot
Windows so it thinks there is no network adapter.
Then
Reboot into bios and re-anable the onboard network adapter.
Then see if windows detects the network adapter now that it is enabled.

Computers &... | 10,977 views | 0 helpful votes

Not finding what you are looking for?
Micrografx Designer 9 Full Version for PC Logo

7 questions posted

Ask a Question

Usually answered in minutes!

Top Micrografx Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Micrografx Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Micrografx Computers & Internet

  • Micrografx Computers & Internet

Most Popular Question

am getting error

  • Computers & Internet
Loading...