http://www.fixya.com/support/p125956-vornado_circulating_fanSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comFri, 08 Jan 2010 22:21:03 GMT80http://www.fixya.com/support/t2073496-need_remove_gril_clean_blade_grillI am trying to remove the grill of my fan so that I can clean it. Can you tell me how to do this?Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t775756-spring_reseat_from_base_fan_vornado_750My V-750 was packed with dust clogs throughout. I took the front grill and backside cover off, and meticulously worked with tweezers, a pick and compressed gas to clean it out. I was astounded by the huge amount and huge chunks of dust that I got...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t885995-motor_stoppedMy fan used to start very slowly, when I turned it on the bladeswould be moving ever so slightly, but the fan was making its loudest noise, than after about 5 mins it would go full-speed.? Now it never kicks over.? Is the motor burned out??? Is it...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t879490-motor_problemI have an older vornado fan that i still love, but it has recently started making noise while in use. i disassembled the unit and it seems like the spinner portion is rubbing on the housing. does the unit just need some new grease or lubricant to fix...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t192415-blade_loosethis is a standing vornado fan with full variable speed control. The blade assembly (looks like one piece) slides from one end to the other of the shaft about a 1/2 inch to an inch. More accurately put, the shaft slides in and out of the motor...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t179283-vornado_will_not_stay_in_fixed_positionMy Vornado 723 will only stay in a straight upright position. If only moved slightly it will drop to the lowest position. It's supposed to have enough resistance to allow it to stay at any point between straight up and straight down. Is there...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t376169-electrical_probleminstalled a carriage house 2. Light kit works, fan does not. took apart, investigated... white electrical connector between fan and light kit sparks blue... fan runs. wiggle some more, fan stops, wiggle some more, connector "lights up" fan starts......Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t391073-purchased_hap_726_2_7_08_holmes_truehepa3 days later the unit is not working? i've checked to make sure everything is seeded properly, nothing. all light functions are working...timer doesn't seem to work either?????Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t392192-kemore_dryer_model_96591220Dryer when push start button on does not turn dryer on. Took button switch out and went to see if it was good and it was ok. Had the start button tested at a sales and repair shop. The buzzy sound under near the motor when you push start button.Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t414209-casablanca_w32_fan_light_switch_reversedI installed a new W32 wall controller for a Casablanca fan and the Fan and Light switches are reversed. When I swap the black wires with white stripes as described in the installation manual, the switch is totally dead and does nothing. When I swap...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t656066-wiring_new_light_over_kitchen_sinkWe bought a light fixture at Lowe's on the clearance table, the instructions are missing. How do I know which lead is hot and which is not?Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t720770-dimmer_switchesI have a basic wall slide dimmer switch with 3 places to put 2 wires. 2 screws on the bottom & 1 on top next to the ground wire. I hooked up the 2 on the bottom- nothin. I reversed the wires, still nothin. would the one on top be a + or --. which of...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t854813-heritge_ceiling_fanI have bought from a friend a heritage ceiling fan but he has misplaced the plate that attaches to the shaft a the ceiling fan, and also to the ceiling. It helps the fan rotate on a even scale. How can I get just the plate I need. The model is #...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t903656-prostandard_floor_fan_model_fe2_45adqneed on off speed switch .can i buy one from this siteFri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t907421-wireing_bathroom_extractor_fan_three3 switches one for landing light, one bathroom light, one for extractor fan. This is all in one, the first two work o'k but I cannot get the extractor fan to switch on.Do the three have a comon live connection or do you need a separate live conection...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t914219-fans_spinning_opposite_directionsBuilt a custom home and had two Minka Aire F705-TSP installed in 24 foot ceilings. After one month, the syncronized fans began spinning opposite direction. Electrician had to come out w/ scaffolding to get to spin back in same direction. Two months...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t1043411-casablanca_fan_dissassemblyI?m going to replace the flywheel on a Casablanca Victorian Fan and would like to know is there is a special tool available for pressing the shaft out of the housings. Thanks, RobinFri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t1245296-ceiling_fan_casa_viejoThank you so much for your helpful response - I will get a new fan! ?In the meantime, is the high pitched noise representing a danger? ?As I said, I turn off the circuit breaker (which turns off everything else on the circuit) but the fan still makes...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t1245380-ceiling_fanThank you so much for your helpful response - I will get a new fan! ?In the meantime, is the high pitched noise representing a danger? ?As I said, I turn off the circuit breaker (which turns off everything else on the circuit) but the fan still makes...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t1255319-marquesas_ii_hampton_bay_workI bought this ceiling fan light combo to update my living room existing fan light fixture. It is connected to light switches on both sides of the room, Since I was replacing an existing combo I connected exactly as the previous unit but can get no...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t1484915-did_burn_out_chandelierThe lights were flickering and I heard a crackling sound coming from the switch. I turned off the chandelier and changed the fuse, When I turned the light back on it wouldn't come back on. I took out the bulbs and saw that some were 40 watts and some...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t1580573-need_fan_blade_attachmentNeed a fan blade attachment bracket for a Hampton Bay ceiling fan #23F8. #0080349Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t1592978-motor_burning_smellI purchasd a 12001 Ahola breeze, and on the 23rd of Jan. the fan started to give a burning smell to the motor. Now the fans will not spin and the fan is at a complete stand still. the unit is less than 7 months old.Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t1858007-burned_out_power_switchThe wiring for the power switch burned out for the connector. there are 3 wires going to that switch. I am looking for a wiring diagram for the switches. can you helpFri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t1909967-ceiling_fanlight works but fan doesn't rotateFri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t1911182-quorum_fan_model_350605_2_slowing_downI have two Quorum 350605-2 fans in my great room which I keep on low speed pretty much continuously. One of the fans is turning much slower than the other. A couple years ago, they were both rotating at the same speed. I have manually moved the...Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t1921541-ceiling_fan_works_light_doesnt_modelceiling fan works, light doesn't model 55400Fri, 08 Jan 2010 22:21:03 GMThttp://www.fixya.com/support/t1923182-get_cool_operator_fan_apart_clean_darnedMy 9-12 inch Cool Operator fan is filthy, and I can't figure out how to take it apart to clean it. The fan works GREAT, but is caked with dust inside and I can't figure out how to dismantel it to clean the blades, baskets, etc. Please help!!!Fri, 08 Jan 2010 22:21:03 GMT