Hose Retainers (4). Place hose in retainers to store hose onunit.Electrical Cord Hooks (2). Wrap electrical cord around themto store electrical cord on unit. The upper cord hook rotates forquick cord release.Nested Wand Storage. The crevice wand stores inside thelarger wand.Carrying Handle. Use this handle to carry unit from one placeto another.Dusting/Upholstery Brush Storage.Store the dusting brushon back of cleaner.111111111212131314NOTE: WHEN UNIT IS RUNNING, DO NOTATTEMPT TO REMOVE ANYOBJECT WHICH PREVENTS THEBRUSH ROLL FROM TURNING.First, turn off unit, unplug from the electricalsocket, then remove object from brush rollarea. Ex: sock, rug, etc.Thermal Cut OffThis cleaner has a special thermostat that protects the cleanerin case of motor overheating. If the cleaner suddenly turns off,follow this procedure:1. Push rocker switch to off (O) position.2. Unplug cleaner.3. Check for source of overheating problem (i.e. full dust cup,blocked hose, or clogged filter).4. If a full dust cup, blocked hose or clogged filter is found, emptythe cup, clear the hose or replace or clean the filters.5. Wait at least 30 minutes before attempting to reuse the cleaner.6. After 30 minute cool down period, plug the cleaner in and pushthe rocker switch to the on (I) position. The cleaner should turnon.7. If the cleaner still does not operate, take it to any EurekaAuthorized Service Center for repair. Call 1-800-282-2886 forthe nearest Eureka Authorized Service Center to you.1511121314157
Wiz