Online User Manual and Guide for Eureka Whirlwind LiteSpeed 5843 Upright Vacuum

Eureka Whirlwind LiteSpeed 5843 Upright Vacuum > User Guide
Showing Page 6 out of 20 Previous     2 3 4 5 [6] 7 8 9 10     Next
Loading problems.


Showing Page 6 out of 20 Previous     2 3 4 5 [6] 7 8 9 10     Next

Sponsored Links

Cord  Retainer. To use, push electrical cord down into cord retainer. ON/OFF Switch. International symbol I means On, International symbol O means Off. Dust Cup Latch. Pull up on latch to remove dust cup giving access to the dust cup filter and motor filter. Filter Door Latch. Push down on latch and pivot out for access to the filter compartment. Push up on latch to close door. Dust Cup Filter. Clean the dust cup filter frequently to maintain good performance. Dust Cup. The debris from cleaning is collected in the dust cup. Stair Handle. To use when cleaning stairs. Headlight. Handle Release. Step on handle release to pull handle back to a comfortable operating position. Cleaner Height Setting. An adjustment that raises or lowers the cleaner base to match the type of floor surface. WARNING:   Avoid injury. Keep loose clothing, hair, fingers, and  all  other  parts  of  body  away  from  any moving part (such as the revolving brush). Turn off the switch and unplug the cleaner before changing the cleaner height setting. 1 2 3 4 5 6 7 8 9 10 Helpful Information: Listen to your cleaner. If you notice a change in the sound of the motor or a change in performance, it could simply indicate a common usage or maintenance issue. Such as, a need to raise or lower the carpet height adjustment, possible blockage in hose or brush roll area, or a broken or loose brush roll belt. These are all easy to fix and the instructions are included in this owner’s guide. Becoming familiar with the information in this guide will help you to get the best possible performance from your new cleaner for many years to come. 1 2 3 4 6 5 7 8 9 10 6