20 Most Recent Beko 142746 TV Questions & Answers

I know most of the time if the flyback goes bad it usually takes out the horizontal output transistor with it. Replace the flyback and the HOT and test the surrounding components.

Beko 142746 TV | Answered on Feb 20, 2015

I think a glitch here caused this to be listed in the TV areas and it sounds like a washing machine?

Beko 142746 TV | Answered on Dec 14, 2012

As there is no "Menu" button on its front panel controls, you must have its remote control to select inputs.

Beko 142746 TV | Answered on May 15, 2012

Hi from retired Englishman in SW France,
Methinks you could do with a manual for your washer- for now and probably later!
Sorry but FixYa cannot do that direct- members of the forum are just people from all over the world, probably working from home, and not representing any particular manufacturer ;-0)
You will need to type into your search engine/web browser '(make model number) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount.
You could also try the manufacturer's web site direct ;-0)

If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C.

Beko 142746 TV | Answered on Sep 04, 2011

I have the user manual that you may need in PdF format...
if you want pls send me an e-mail ,I can forward it to you..


Beko 142746 TV | Answered on Aug 20, 2011

Hi ,
option one :
  1. Hold the "MENU" key down to access the TV Tuning menu.
  2. Once activated, the VOLUME +/-,
  3. PROGRAM +/- and
  4. STANDBY buttons are used.
option two
  1. on your remote control go to the menu button,
  2. go to settings,
  3. run auto tune.
Hope this helps! Take care and please Remember to rate/vote and give me
4 Thumbs Up for me to continue for Helping out the Community :)

Beko 142746 TV | Answered on Jun 26, 2011

I need the same solution. My own system is setted up to 'I' and I want to change it to 'BG' but it doesn't work.

Beko 142746 TV | Answered on Jun 14, 2011

I have it in PdF format...pls send me an e-mail ,I can forward it to you..


Beko 142746 TV | Answered on Jun 13, 2011


Set up by Automatic Search

1. Turn TV on
2. Point the remote at tv and Hold SET and TV buttons at the same time and keep pressed for 3 seconds.
3. The LED flashes and the remote control starts the automatic search.
4.The OFF signal is automatically sent to the tv from the remote control.
5. Once the TV switches off press any button except SET to stop auto search.
6. Switch your tv on using the POWER button.

Beko 142746 TV | Answered on Feb 17, 2011

Repair & use. The problem looks to be in S M PS power supply circuit in your TV. The TV getting off is due to safety system. Correcting the defect is needed now.

Contact service center and get it corrected.

Beko 142746 TV | Answered on May 14, 2010

Not finding what you are looking for?
Beko 142746 TV Logo

Popular Tags

48 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Beko Televison & Video Experts


Level 3 Expert

84619 Answers

Andy Latty
Andy Latty

Level 1 Expert

33 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Beko Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Beko Televison & Video

  • Beko Televison & Video

Most Popular Question

tune in beko tv rc647340 remote

  • Televison & Video