20 Most Recent Hitachi Dv18dl 18v Hxp 3.0 Ah Hammer Drill Questions & Answers

THE CHUCK SCREW IS EITHER A TORX BIT, POSSIBLE 20 TORX OR ITS A PHILIPS OR SLOTTED SCREW, REMEMBER THE SCREW IS LEFT HAND THREAD AND ALLOT OF THE TIMES IS LOCTITED IN SO IT DOESN'T UNSCREW WHEN THE ITEM IN THE CHUCK SLIPS AND RUBS ON THE TOP OF IT. IT SHOULD REMOVE FAIRLY EASY!! MAKE SURE WHEN REMOVING THE CHUCK THE TOOL IS IN LOW GEAR/ DRILL MODE OR YOU WILL FIGHT IT FOREVER AND POSSIBLY DOEING DAMAGE TO THE CLUTCH/TRANNY ASSY. THE CHUCK WILL UNSCREW STANDARD THREAD, SHOULD BE A 2 MINUTE PROSSES TO REMOVE THE CHUCK UNLESS ITS ON REALLY HARD. JIMS TOOL SERVICE

Diamond core bit works great on either setting, you will get faster results on the hammer action though

Your charger has failed.

https://www.manualslib.com/products/Hitachi-Uc-18yksl-3659810.html

The OEM chuck for that is about 45 dollars. There are no substitutes offered.

Brand New Cordless Drill Battery for Hitachi DV18DCL

• Type: Ni-MH
• Volt: 18V
• Capacity: 3000mAh
• Color: Black
• Weight: 983g
• Dimension: 124.80 x76.90 x106.50mm

http://www.drill-battery.net.au/buybatteries.php/hitachi_DV18DCL_power+tool+battery.html http://www.drill-battery.net.au/buybatteries.php/hitachi_DV18DCL_power+tool+battery.html

If its not an bad soldering or an passive component , beware almost all brands wenn ordering an electric part for a charger its almost always more expensive then a complete (new charger ) the latest years there are more and more remplacement options to the customer , if there are defect components that are not made for ordering on marketing technical reasons and safety and more reasons. mosnfets (passive component almost sometimes fuse resistors but smd components to repair is not meaningfull . when termical defects are hidden.

The battery is defective.

http://www.hitachi-koki.com/manual_view_export/pdf/C99187413_DV14DCL2_205.pdf

Generally the answer is yes for most models. Check the manual.

control of the electric field wires and the 2 carbon brushes and the switch https://www.kruis.nl/onderdelen/viewer/?m=hitachi&t=DH24PC3_0&p=dh24pc3

Leave the part that is stuck in a jar with petrol overnight and then put it in a vice and try then to open then with spanner at the end of the chuck hope this helps

How to Remove Drill Chuck If there is screw in inside center of chuck remove it, it is probably left hand threads so pretend you are tightening it and it will come free. open chuck fully and insert chuck key into holes and hit it with a hammer to remove it.

Replacement HITACHI DV 18DGL battery pack 100% compatible with the original DV 18DGL battery, high quality, wholesale price. http://www.drillbattery.com.au/buybattery.php/hitachi_DV+18DGL_power+tool+battery.html

I'm hoping you mean a chuck "key" .... there are only 4 different sizes and can be bought in tool stores as universal chuck keys tool 4 in 1 tool...

You need to replace the drill chuck.

try this link... How do release the bit from my Hitachi cordless drill Google Search