Top 20 Pyle PIFMDK6 iPod Car Stereo FM Transmitter w/LCD Display Questions & Answers

There is no 87.5 on your radio so that frequency won't work -- you have to pick another frequency. Find an open frequency on the radio you want to transmit to. Then use the up/down buttons on the right to tune the iWave to the same frequency. That should do it. If you want to save that frequency on your iWave you press and hold the round button at the center bottom of the unit. The left/right arrow button on either side of the round button can be used to click through your saved frequencies. It's not very complicated, but it baffles me that they include no instructions whatsoever with this unit. Otherwise, it works pretty well.

You can select any station you want. On the 'on/off' button on the left side do a short press of that key to get the choice of frequencies. Find a good frequency with no interference (hard to do in a big town with a lot of stations). When you find one you like then press 'set' key and m1 (or m2 or m3) simultaneously to save that frequency. now you should be able to press the m1 key to get that saved frequency back.

This is a device that "Sends" FM stereo & Transmitts Radio waves, and sends sounds/music speech etc, over the airwaves to a suitable reciever an the same "Channel" You can hook up say your Ipod to it and say tune your Car radio to the "Station" it sends on and listen to ya compilations, in the car, thru the car stero system. The radio just "Sees" it as another strong station.

Speaker blown. Amp blown. Volume issue. Could be anything. I woud check the wiring and speaker first.

Question edited for clarity and typos. The Bluetooth isn't correctly paired. You are only half connected. https://www.fixya.com/support/r26362721-pairing_bluetooth_devices STEPS FOR CONNECTING WITH BLUETOOTH DEVICE Once paired you can play music from your Bluetooth device. You can also use the control buttons on the unit to select the tracks from your Bluetooth device. 1. Press MODE button to choose Bluetooth mode, display BLUETOOTH on the screen. 2. Search on the Bluetooth device name from others Bluetooth device and you can and the Bluetooth name - PYLEUSA 3. Select the PYLEUSA Bluetooth name and wait for the device to pair. 4. The PTA44BT will emit a noise confirming that the devices have successfully paired..

PTA44BT

Pyle USA http://manuals.pyleusa.com > PDF > PTA44BT PDF PTA44BT. 4 Channel Audio Amplifier. Multi-Source 1/4" Audio/Microphone inputs ... PyleUSA.com ... Read these instructions thoroughly before using this item. 9 pages

PYLE PTA44BT USER MANUAL Pdf Download ' ManualsLib

ManualsLib https://www.manualslib.com > ... > PTA44BT View and Download Pyle PTA44BT user manual online. 4 Channel Audio Amplifier. PTA44BT amplifier pdf manual download. ..

If you're having trouble scanning FM radio stations on your Pyle PBMSPG190, there are a few things you can try:

- Check your antenna: Make sure your FM antenna is properly connected to your radio and is positioned in a location with good reception. If your antenna is damaged, you may need to replace it.
- Check the FM frequency range: Make sure that the FM frequency range of your radio is set correctly for your location. In some cases, FM frequencies may differ depending on your country or region.
- Check for interference: Electronic devices such as smartphones, tablets, or other nearby radios may cause interference with your radio's ability to pick up FM stations. Try turning off nearby electronics or moving your radio to a different location to see if this improves reception.
- Manually tune to specific frequencies: If the automatic scan is not working, try manually tuning your radio to specific FM frequencies to see if you can pick up any stations.

If none of these steps work, it's possible that there may be a problem with the radio's internal components. In that case, you may want to contact Pyle customer support for further assistance.

That normally happens when the memory battery on the motherboard fails. It no longer remembers what your last setting was. No service manual for it. https://www.google.com/search?q=Pyle+PT260A ...

If your Pyle boombox has turned on but there is no sound in any mode, it could be caused by a problem with the speakers, the audio output, or a software issue. Here are a few steps you can try to troubleshoot the issue:

1. Check the speakers and ensure they are securely connected and not damaged. Make sure the volume is turned up and the audio source is set to the correct input.
2. Check the audio output and ensure it is not set to the wrong output. Make sure the audio output is set to speakers and not headphones or Bluetooth.
3. Check the audio source and ensure it is properly connected and working. Make sure the audio source such as a USB, SD card, or Bluetooth is properly connected and that the sound is not muted.
4. Try resetting the boombox by unplugging it for a few minutes and then plugging it back in. This will force the boombox to restart and may resolve the issue.
5. If the above steps do not resolve the issue, it may be necessary to have the boombox serviced by a professional technician.

Hi, you can use the instructions in the product manual to help factory reset your device. Otherwise, you can take it to a store like Geeksquad/Bestbuy in order to get the device factory reset on your behalf. But you might want to call ahead first to ensure that location has access to the manual in order to perform the factory reset. Thank you.

Probablyna power supply issue in the mixer. Check for the correct voltages coming from the power supply.

Contact Pyle directly to inquire.

A steady popping sound called motorboating was a common fault in the early days of the transistor radio and not so common today. Back in those days the fault was usually found at the front end in the tuned circuits but I understand the condition can have a variety of causes. Below is a link to the Wikipedia article on the subject... https://en.wikipedia.org/wiki/Motorboating_(electronics)

Depending on the age of the unit, if it uses the old style control knobs they can get dirt in them and produce that effect. Cleaning with switch cleaner will solve that. Otherwise if the noise is on one channel it could be faulty transistors. If it is on both channels then you are looking for something common to both channels. But not the power supply. Check if the device uses an STK chip amplifier. I'll post a picture of what it might look like. If it does then that could be faulty.

Hello Patt, the configuration of the speakers will depend on their height, surface to cover, and distance between them, as well as the amplifier to use As an initial test, put the selector switch of each speaker for the 10-watt position and test the result Depending on this test, you will have to raise or lower the power, to achieve the best coverage I hope you serve the suggestion Greetings Franco Dosil Hola Patt, la configuracion de los parlantes dependera de su altura, superficie a cubrir, y distancia entre ellos, como asi tambien el amplificador a usar Como prueba inicial, ponga la llave selectora de cada parlante para la posicion de 10 watts y pruebe el resultado Dependiendo de esta prueba, tendra que subir o bajar la potencia, para lograr la mejor cobertura Espero le sirva la sugerencia Saludos Franco Dosil

return it

Belt getting old or loose and is not turning table properly.

may be the set up .

What do you have plugged into it? Or is it the speaker alone?

Get in touch with Behringer they will be able to help.

If the transformer is applying voltage to the ac connectors of the bridge but there is no voltage on the dc connectors, then the diodes are open.