20 Most Recent
Questions & Answers
Vtech cordless phone appears to be mute
Try the "hard reboot". /1/ Unplug power from base station. /2/ Disconnect battery in each handset. /3/ Wait a few minutes. /4/ Reconnect battery. /5/ Re-plug-in power to base station. /6/ Place handset in base station, and wait a few minutes for it to recover.
You may have to reset time/date and/or the handset ##.
on Mar 21, 2015
VTech 5.8 mhz won't work
I found a solution that fixed this problem (at least for me). On the vtech site they said to unplug the base unit for at least 5 minutes. Previously, I had only unplugged the base unit for a few seconds. This time, I left it unplugged for about 10 minutes or so and when I plugged it back in, everything was working fine. Apparently there is some sort of capacitor that must discharge long enough to completely remove power from the circuitry.
Good luck and I hope this works for you!
on May 17, 2014
Out of range/no power at base
Most multiphone sets need to have the phones hung up on the same base all the time. They are set up as set 1 and set 2 etc. Look in the screen, it should say which is 1 and 2. 1 is always the main base. Try unplugging the power cord for a few minutes. It sometimes takes that long for the equipment to reset itself.
on Apr 26, 2014
Not finding what you are looking for?