If your device does not respond to the remote control
after trying all codes listed for your brand, or if your
brand is not listed at all, try searching for your code.
NOTE: Before performing a code search for a CD or DVD player
or a VCR, turn on the device and insert the required media.
For example, to search for a code for your TV
[1] On the remote control, press TV once
[2] Press and hold SET until the LED (red light)
blinks twice, then release SET
[3] Enter 9 - 9 - 1.The LED will blink twice
[4] Aim the remote control at the TV and
slowly alternate between pressing POWER
and TV. Stop when the TV turns off (after
pressing POWER)
NOTE: In the search mode, the remote control
will send IR codes from its library to the selected
device, starting with the most popular code first
[5] To lock in the code, press and release SET.
The LED will blink twice
[6] To search for the codes of your other
devices, repeat steps 1 through 5, but
substitute the appropriate device key for
the device you are searching for
32 questions posted
Usually answered in minutes!
1,438 Questions
502 Questions
218 Questions
216 Questions
137 Questions