20 Most Recent Biostar P4VMA-M Motherboard - Page 5 Questions & Answers

Check your invoice of hard disk

you can go to biostar web site to support then to download drivers type in your bard then download all updates ok

try ebay for board ok

bad board

Windows 7 can, in many cases, work on older motherboards using generic drivers built into the OS. Some components may not work, or may work using VISTA drivers downloaded from the MFGR website. You will need to provide the BIOSTAR MB Model number for me to assist you more than this.,

i think its the video card make sure that your power supply is big enought to work for everything that you are using as well ok.

ANSWERD

1.CHECK THE MONITOR ALSO CHECK SO ALL CABEL ISSCREWED TIGHT.2.NOW CHECK THE VIDEOCARD SHOULD SIT TIGHT AGAINST THE MOTHERBOARD.

most likely your computer isnt picking up monter connetint and disconnet ing it while it is on

try going into bios blue screen press f2 or f10 or f12 on start up beep . change setting in video settings

1. Watch for a "entering setup" message in the first few seconds after turning on your computer. This message varies greatly from computer to computer and also includes the key or keys you need to press to enter BIOS.Here are some common ways you might see this BIOS access message:
   • Press [key] to enter setup
   • Setup: [key]
   • Enter BIOS by pressing [key]
   • Press [key] to enter BIOS setup
   • Press [key] to access BIOS
   • Press [key] to access system configuration
2. Quickly press the key or keys instructed by the previous message to get into BIOS

Plug your video in. Is it VHS or Betamax?

HAVE YOU INSTALLED THE DRIVERS.

Windows not work with you new hardware.1.Start windows in safe mode (press F8 before windows start).Maybe now windows recognize your new hard.if reboot continues...2.Insert Windows disc and start with disc.In the menu select repair start.

Do you really, manners please. First of all more information is required, such as what model number is the Bioster motherboard, including the version number. Also we need to know what CPU is being used, that is assuming you have put a cpu onto the motherboard.

can you be more specific

http://www.gobookee.net/motherboard-block-diagram/http://en.wikipedia.org/wiki/MotherboardFIND THIS.