20 Most Recent Bosch Classixx WVF 2402 Front Load Washer/Dryer Questions & Answers


Try this website: www.bshappliancecare.com and I think you might find what you are looking for. Good luck.

Bosch Classixx... | Answered on Dec 17, 2016


First remove screws X2 from back of the machine that hold the top cover on. Once removed the whole top slides backwards and can then be lifted off. This gives you access to the plastic clips that hold the timer face panel on. The main control dial must first be pulled off through the front cover, then remove the front cover by unclipping it (a pain and a fiddle!) The dial on the timer can then be pulled off revealing the two mounting screws that hold the timer in!!

Bosch Classixx... | Answered on Oct 25, 2014


The above answers were pretty helpful, did you fix your problem with them? Did you check the manual for further instructions? You can find a PDF copy here: Bosch Classixx 5 Manual

Bosch Classixx... | Answered on Jul 15, 2014


Can you describe the noise? Is everything else working normally? From what you are saying, my guess at this point would be that the pulley on the motor is working loose.

Bosch Classixx... | Answered on Jun 13, 2014


down load from their web site

Bosch Classixx... | Answered on Jan 23, 2014


cheak the filter witch is at the intake and if when it is going to fill does it buzz if dose that means the vale is working if not call a repaire man out hope this helps

Bosch Classixx... | Answered on Jan 09, 2014


Hello All

Problem solved by clearing out the condensate container which on inspection was full of dried up fluff and dead tissues! This is not a ****that is mentioned in the manual and access to the bin is pretty tricky so I suspect there are lots of machines out there with the same problem waiting to happen.

Access was gained by taking the top of the machine off, removing the dryer motor and then scraping out the muck using a wire coathanger and a vacuum cleaner.

Many thanks

Andy Wray

Bosch Classixx... | Answered on Oct 19, 2013


This video will show you how to change a door seal on this Bosch WVF2402GB/02 front loader washing machine
we have all bosch repairs in our channel
You can get seals on eBay

Bosch Classixx... | Answered on Jul 23, 2013


switch off your power to the washer pull-out so you can undo the screws for the lid take the lid off now open your door there should a clamp surrounding your door seal you may not be able to see it but it is there undo it now look inside your washer to the inside at the back part of your door seal there will be a clamp this should either be a spring clamp or a screw clamp undo this clamp door seal with pull off now reverse the order of how you took your door seal out problem solved it is not too hard to do once you have done it you will find any washer door seal easy to replace trust me done thousands m8

Bosch Classixx... | Answered on Jul 23, 2013

Not finding what you are looking for?
Bosch Classixx WVF 2402 Front Load Washer/Dryer Logo

117 questions posted

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Marvin
Marvin

Level 3 Expert

84625 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Carmen Mikulic

Level 2 Expert

415 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bosch Washing Machines

  • Bosch Washing Machines

Most Popular Question

bosch nexxt 500 series front loading

  • Washing Machines
Loading...