Bosch BUC11700UC Cyclone Jet Bagless Upright VacuumTroubleshooting & Support

Hot Topics:

Problems & Solutions

Solved Problems for BUC11700UC Cyclone Jet Bagless Upright Vacuum - White-on-White RSS Feed

need switch for a shop vac modle qpl650

I was able to find the exploded part list view for this model on the following link to help in determining the part number for the switch....
- pete_buckler
- Dec 12, 2008
- 1333 Views
- 3 Solutions
Bosch vacuum Motor turns off after a few minutes

My vacuum has the same problem when the filter needs to be cleaned. Just twist the filter cover to take it off, then press the red button...
- wallerroo
- Oct 8, 2008
- 463 Views
- 3 Solutions
Vacuum cleaner shuts off after short use....

Almost all vacuum cleaners have a thermal cut-out, which operates when the machine gets too hot. It resets automatically when it cools down....
- petrak28600
- Jul 17, 2009
- 783 Views
- 1 Solution
Replace on/off power switch for BUC11700UC vacuum...

Bryanv Thank you for and excellent solution. I have several suggestions: 1) After removing the 11 screws as directed, I was unable to...
- sunil_sp
- Jul 5, 2008
- 352 Views
- 2 Solutions
Bosch BUC11700UC Cyclone Jet Upright Bagless...

I had the same problem. I ordered a new switch from a local appliance place part#417915 (also try 54542), but it can be found on-line...
- broken arrow
- Apr 8, 2008
- 204 Views
- 1 Solution
I need a new belt drive gear.

Here's the Bosch website where you can order from the parts list . http://www.boschappliances.com/site_tools/orderparts.aspx?menu...
- msgtgeno
- Nov 7, 2008
- 304 Views
- 2 Solutions
how do I clean canister

Best to check the instruction book, if your having trouble finding your instructions check out http://talkappliance.co.uk/downloads/
- Sue Jackson
- Apr 22, 2012
- 0 Views
- 1 Solution
Roller wheel is not turning and vacuum is

Add some WD40 to the axle of the roller wheel and work it in good. Keep at the wheel until it moves freely. Paul
- herbpointer
- Oct 12, 2010
- 67 Views
- 1 Solution
My Bosch 1450 Bagless Jet vacuum cleaner shuts off

maybe or it could possibly an eletrical problem.
- benlaluc
- Jun 29, 2009
- 287 Views
- 1 Solution
Bosch Vacuum upright

its a problem with the power switch you can wire nut the wires together but I have been looking for parts myself.
- Lazarob
- May 20, 2008
- 58 Views
- 1 Solution
i have a bosch ergomaxx 2000w which I need to

Got the same ! Remove both back wheels (just pull gently with a screwdriver), then with a big screwdriver pull the cover while pulling...
- dc0106
- Jan 16, 2010
- 451 Views
- 1 Solution
Bosch Vacuum Cleaner: I changed

Greetings from GoVacuum.com, It sounds like you may have a bad thermal switch inside the machine. Most vacuum cleaners have a switch...
- zenman88
- Aug 16, 2008
- 331 Views
- 2 Solutions
drive belt on upright bagless cleaner

Usually the drive belt can be put on by taking off the sole plate on the base of the vacuum. If you turn it around you may be able to find a...
- CleanEllie
- Jun 13, 2008
- 98 Views
- 2 Solutions
How do i install a vacuum bag in a bosch vacuum

try this linkhttp://homeappliance.manualsonline.com/manuals/mfg/bosch/bsa2uc.html?idRes=11225902
- chatterel
- Apr 11, 2012
- 11 Views
- 1 Solution
manual for bosch extraxx17 vacuum cleaner

Go to the following web page and enter your "E" number (product number) and you can get the info as a PDF file.
- suzanne quick
- Dec 27, 2011
- 42 Views
- 1 Solution

See all Bosch BUC11700UC Cyclone Jet Bagless Upright Solutions

Tips & How Tos

Do you have any good tips or tricks? - Write a Tip!

Unsolved Problems for BUC11700UC Cyclone Jet Bagless Upright Vacuum - White-on-White RSS Feed

I cannot remove the cover that holds the brush...
- xbek
- Jan 28, 2012
- 0 Views
Solve It
Seal for Bosch Upright Vacuum Cyclone Jet buc11700

I am missing a seal at the base of the dirt container, so that when I move the vacuum back and forth, you can hear the...
- Ken Peterson
- Jan 14, 2012
- 4 Views
Solve It
Plugged in and will not power up. Cord looks

Plugged in and will not power up. Cord looks fine. Power switch seems ok but have not taken apart to see if its the...
- Scott Rhodes
- Oct 15, 2011
- 6 Views
Solve It
Will not power up
- Scott Rhodes
- Oct 15, 2011
- 0 Views
Solve It
the brush does not turn
- Rengan Krishnan
- Oct 11, 2011
- 12 Views
Solve It
need to reset brush motor

need to reset brush motor - is there a reset button?
- chardstuff
- Sep 9, 2011
- 3 Views
Solve It
My vacuum is 8 yrs

My vacuum is 8 yrs old & I love it but it's stopped sucking things up. The brush doesn't seem to move...
- wonderwom329
- Aug 1, 2011
- 5 Views
Solve It
how do I open the

how do I open the bottom to clean out the roller ?
- scottwrig637
- Jul 17, 2011
- 1 View
Solve It
The handle is broken approx.

The handle is broken approx. 8" down from the very top of machine. Just below the triangular hand grip. I need...
- alltom
- May 6, 2011
- 5 Views
Solve It
How do I remove the

How do I remove the one screw that it is located inside of the upper handle where the switch is located therein? Can I...
- pauljan92
- Apr 21, 2011
- 4 Views
Solve It