95.Operate unit with rotary switch.Once the attachment is in place, thespeed of its moving components canbe controlled through the use of therotary switch at the side of theergonomic multifunction arm. Seefigure 2a. The rotary switch has sixpositions:a. “P,” a park position used to “park”the drive unit prior to changing thepositions of the ergonomic multi-function arm.b. “O/Off,” the off position.c. Four speeds labeled 1, 2, 3 and 4.Speed 1 is the lowest speed. Thespeed increases with eachsucceeding step up to the highestspeed, speed 4.All models of the Bosch CompactSeries Kitchen Machines incorporatean electronic safety control to protectthe motor. If the safety becomesactivated, the motor will stop running.Turn the machine to off and allow tocool. See TROUBLESHOOTING at theback of this manual.WARNINGOperate the appliance with the attachmentsin their operating positions, as shown intable 1, only. Do not operate at no load.6.Turn power unit off.When your work with the attachmentis completed or the capacity of thebatch feed attachment has beenreached, turn the power unit to offposition, “O/Off,” turn the rotary knobto the “P,” park position, to place thedrives to their parked positions, andthen unplug.7.Remove the attachment.Remove the attachment from thepower unit, in some cases it will benecessary to move the arm to allowremoval of the attachment. Refer to theinstructions for the specificattachment being used.8.Continue use.If the attachment was of the batch feedtype and you wish to continue usingthe attachment, empty the bowl or jarof the attachment per its specificinstructions and reinstall theattachment as before. Repeat thesteps 5 through 7 as often asnecessary to complete necessarywork.9.Work completed,remove attachment.If the attachment is of the continuousfeed type, or is the batch type, andyou have completed the work youwished to perform with theattachment, remove the attachmentfrom the power unit. In some cases itwill be necessary to move the arm toallow removal of the attachment. Referto the instructions for the specificattachment being used.10. Place contents (batch feed type).If the attachment is the batch feedtype, disassemble per the specificattachment’s instructions and placethe contents in a suitable container.11.Care and Cleaning.Once you have completed workingwith the Bosch Kitchen Machine, thenext step is to disassemble and cleanthe attachments. If you wish to useanother attachment, please return tostep 4, above.PowerunitWith the power unit turned off andunplugged, it should be cleaned only witha clean, damp cloth. Then wipe off the motor
Guru