Kirby G4 Bagged Upright Vacuum - Answered Questions & Fixed issues
How to unlock handle on Kirby Sentra
Release the belt tension by using the handle on the Belt Lifter to turn it all the way to the right (clockwise) until the green arrows line up.For more information: https://google.com/
Kirby vacaum cleaner
Kirby's are repairable. Find a dealer or a repair shop near you to get it fixed.
How do I replace a belt on an upright kirby?
First, go to a vacuum store ("sewing and vacuum" shop in some places) and purchase the correct belt. You unlock the rug plate by unhooking two latches on the rear of the nozzle. The rug plate is the steel item which rubs on the carpet and locks the brush roll in place. Just look on the bottom and you will see two steel levers which you need to move. You then lift out the brush roll: pay attention while you do this to see how it comes out, as that knowledge will help when it is time to put it back in. You then place the new belt over the brush roll and then replace the brush roll. On my Gsix, one of the plastic brush roll ends is larger than the other. The roll will only fit in one way, so flip it around if you can't get it to smoothly slide in place. Maybe it is the same on your G4.
Kirby g4 power will not ingage
There could be a few reasons. Try a different power outlet and check the cord and belt. Next there are two safety switches on the Kirby that need to be engaged for the vacuum to start. One is on the mini-emptor to make sure an outer bag is engaged, the second is on the front nozzle to make sure the nozzle or hose is attached. You can see pictures
here.
GoodVac.com Technician
www.goodvac.com
1-800-755-6586
Won't turn on
http://www.ebay.com/gds/COMMON-PROBLEMS-WITH-THE-KIRBY-VACUUM-TROUBLESHOOTING-/10000000003800312/g.html
Not finding what you are looking for?