20 Most Recent Karcher K 5.85 M Electric Pressure Washer - Page 5 Questions & Answers

blockage in the wand nozzle jet

Karcher Garden | Answered on Feb 25, 2018

Seams like water pressure switch gem check the water inner filter maybe block.

Karcher Garden | Answered on Jan 16, 2018

This video maybe helps you. Try to watch the video very carefully. Otherwise, you have to buy a new pressure washer surface cleaner. Before buying a new surface cleaner plz read buying guide of pressure washer surface cleaner

Karcher Garden | Answered on Jan 11, 2018

ok ok the heater won't fire. ya burnt the element out that why it won't fire, get used to cold washes or get it fixed.

Karcher Garden | Answered on Jan 06, 2018

i rekon you have burnt out the heating element inside so you will have to just do cold washes.

Karcher Garden | Answered on Jan 06, 2018

Take the wand hose off the washer itself and you will likely find a filter outfit that gets plugged up. Take it out and clean it real good. Mine was full of stuff out of the hose that gets in when the hose lays on the ground and stuff gets in. Also if hose has been used to drain anything. My filter was plugged and with the pressure it created the washer would not shut off. There could be a filter in the wand area in some models.

Karcher Garden | Answered on Dec 31, 2017

If you are unable to shut off the pressure from the wand, there may be an issue with the unloader valve that is stopping it from switching into bypass mode when the trigger wand is released. The unloader valve is designed to respond to the spike in pressure created when the trigger wand is released, and to divert the flow of water coming from the pump to bypass the pressure hose and flow back into the intake end of the pump. If the unloader valve fails to switch into bypass mode, water may continue to flow out of the trigger wand. This may also cause damage to the wand. If you are unable to shut off the pressure from your power washer, stop the engine and discontinue use immediately. The unloader valve should be removed and possibly replaced if found to be malfunctioning. The inability to stop the flow of high-pressure water from the wand can be dangerous and should be fixed before continuing to use the machine.

Karcher Garden | Answered on Dec 29, 2017

pulsations indicates an pressure controller suffering from a partially blocked jet at the wand end
blocks up p pressure drops off , unblocks starts pressure to repeat the cycle

Karcher Garden | Answered on Nov 25, 2017

For a service manual, contact Karcher directly.

Karcher Garden | Answered on Oct 10, 2017

Not finding what you are looking for?
Karcher K 5.85 M Electric Pressure Washer Logo

45 questions posted

Ask a Question

Usually answered in minutes!

Top Karcher Garden Experts

John Trevino

Level 3 Expert

1388 Answers

Harold Baxter

Level 1 Expert

4 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Karcher Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Karcher Garden

  • Karcher Garden

Most Popular Question

fix problem karcher k4 pressure washer

  • Garden