I have a culligan softminder twin system that is releasing salt and water onto the floor also the...
(More)
I have a culligan softminder twin system that is releasing salt and water onto the floor also the sytem does not seem to be cycling thru correctly and the water is not coming out pure it is discolored and has what lookslike asn oily film to it when left standing for more than 10 minutes
Looking for ''Culligan soft-minder meter'' (part# 01-0073-47) for a 1998 Culligan Mark 100 water...
(More)
Looking for ''Culligan soft-minder meter'' (part# 01-0073-47) for a 1998 Culligan Mark 100 water softner. I believe the turbine is no longer moving as the meter does not count down. What does the part cost? Where available? Can I install myself with ordinary tools? Thank you.
I have a culligan soft minder twin that was installed around 1998. It has constant flow from the...
(More)
I have a culligan soft minder twin that was installed around 1998. It has constant flow from the bleed line even after the unit has completed a regen. I did a manual regen with it isolated and had the same results when I unisolated it. I currently have it on bypass.
I have a culligan water softner that the display keeps saying missed rinse and now water is bad salt...
(More)
I have a culligan water softner that the display keeps saying missed rinse and now water is bad salt tank is also mixed with water and salt. HELP>
I have the same problem with my system. In fact, I'm finding the water level in my salt tank is...
(More)
I have the same problem with my system. In fact, I'm finding the water level in my salt tank is rising very slow with each cycle. The only information I have been able to find is that there is a blockage in the saltwater transmission line, but I have not found it in my system yet. I would also be interested in any insight to the problem.
I have a Culligan water softener and noticed recently that there is a running water sound coming...
(More)
I have a Culligan water softener and noticed recently that there is a running water sound coming from the drain tube. There is no leaking, and the sound is almost like a constant trickle. It stops if we bypass the softener. any ideas? Culligan charges a fortune for a service call not to mention any parts. There are no error codes on the display and the owner's manual is not very helpful for troubleshooting.
the water system alarm went off. I changed the filter and the UV bulb. I plugged it back in and the...
(More)
the water system alarm went off. I changed the filter and the UV bulb. I plugged it back in and the alarm still sounds. I cannot find a reset switch anywhere
I have a Mark 812 softener and it will not recharge. It starts but then no water goes through. What...
(More)
I have a Mark 812 softener and it will not recharge. It starts but then no water goes through. What is the most likely cause?
I have a Culligan Mark 710c Hard Water Treament system. It seems to be leaking from somewhere and I...
(More)
I have a Culligan Mark 710c Hard Water Treament system. It seems to be leaking from somewhere and I cannot seem to find where. This unit came with the house that I purchase. It has actually been dormant and not in use for awhile.
To be honest, I wouldn't mind finding out which hose brings water into the unit so I can close that hose off so I can drain it and clean up this soggy mess.