http://www.fixya.com/support/p113669-electrolux_centralux_vacuumSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 10 Dec 2009 20:49:33 GMT80http://www.fixya.com/support/t3558788-anyone_know_get_replacement_floorDoes anyone know if i can get a replacement floor nozzle for my eletrolux z8220Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t3549587-am_looking_replacementI am looking for a replacement "beater bar" -roller brush for my Centralux power nozzle model # N106M. Thanks, khaler45Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t3534509-after_using_vac_10_minutes_orAfter using the vac for 10 minutes or so, the motor starts turning on and off with greater frequency the longer I let it run. Eventually it is on and off so frequently that it has no power. Would this possibly be the 24V relay? I have checked the...Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t3294283-need_help_because_problemHi I need help because I have a problem with my Electrolux Centralux Central Vac system in my house. When I plug the vac hose in the central vac socket at first I heard the motor running very gently with NO suction then after a minute or so it went...Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t2747476-no_suction_but_good_exhaust_flowwhen vacume is turned on at the outlet motor has good exhaust but no suctionThu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t3226389-need_reset_button_part_number_findI need to buy a reset switch for my Electrolux upright vacuum cleaner. Part number 1410-L410-P3F1-E04-225AThu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t3099857-no_suctionno suctionThu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t2979891-vacuum_hose_split_very_close_handlemy vacuum hose has split very close to the handle- how do I remove the handle, cut the hose at the split & reattach it to the handle unit - Centralux central vacuum system. Where can I find a diagram of how to remove the handle?Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t2844694-electrolux_central_vac_clicks_when_trywhen puttinh in the hose in outlet I hear motor click but will not startThu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t2525339-switchthe on off switch for the vacumn is clicking but not wanting to startThu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t249220-vacuum_hose_replace_electroluxOur old Electrolux vacuum hose is damaged where it enters the nozzle.? I'd like to overcome this by cutting the hose a few inches shorter.? How is the hose removed/reinstalled into the nozzle, please?Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t2443240-centralux_minimal_suctionI emptied the canister and wiped the sponge filter off and almost no suction. I can hear the vacuum when I plug in the hose and turn on the switch. What do I look for?Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t2457405-reverse_hose_inlet_power_unit_centraluxI believe I have something stuck halfway through the hose. It has been suggested that I reverse the hose at inlet on power unit and then **** it out. How do I do this? Is there an easier way to get the thing out of the hoseThu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t2463848-filtex_central_vacuumnot much suction--think i need an new motorThu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t1819187-electrolux_powernozzle_not_workingOur powernozzle (Model N137M) for our Aerus (Electrolux) central vacuum is not working. The mini power nozzle works, so I know that it is not the cord causing the problem. Is there a fuse in the power head that simply needs to be replaced possibly?...Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t2008664-brush_assembly_will_no_longer_spinHave an Electrolux central system, 5 years old, and just recently, the brush assembly quit turning on the vacuum head. The suction remains good however the brush assembly does not spin. Please advise on this...Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t1621999-power_head_not_workingthe switch turns on and it does have suction but the roller in the head does not move and the light does not come on...Got any suggestions?? Thanks Shelly HayesThu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t1641321-suctioncentralux vacuum two years old doesn't have the volume air movement it once had. Unit will still quickly reach an extremely high head of suction so no broken pipes. ran napkins thru no blockage, overode filter safety switch ran with out filter no...Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t144524-blockageI have a blockage in the hose - how do I get it out - i have tried broomstick - too short. or so i need to call a repair man - where do i look to find a repairman for this vacuum-Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t1518784-am_installing_central_vac_like_someWhat is the proper way to wire in two inlets. A schematic would be helpful. thankyou MILT WOOD 905-734-8187Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t1474706-clogged_hose8 Year old Electrolux Centralux Vacume Cleaner has a clogged hose. Seems something is lodged in the middle of the hose - about half way down. I have tried a "plumbers snake" with no luck, except to clean out some "lint Balls" bot not the obstruction...Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t1362305-doesnt_workOur home was built and finished in August 07. ?The central vac doesn't work. ?There is supposed to be a slot that opens in the kitchen where you sweep the dust and it sucks it up. ?Also, the mounted unit on the garage wall has a hose that goes up...Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t1349346-unit_will_not_turn_off_unless_unpluggedworked fine, used it on one of my wall outlets, unplugged it, and it kept on running, replaced the outlet, did not helpThu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t810634-electrolux_centralux_vacuumI plugged in the hose this morning and the motor was running but not the vacuum. I went to the garage and the unit was unplugged. I plugged the unit back in but it still is not working. I noticed a black button the the side of the unit near the pilot...Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t1247752-non_working_electrolux_centralux_vacuumI have an 8 year old system which includes baseboard vacuum (?). I plugged it in this morning and nothing. The handheld vacuum doesn't work and neither do the baseboard units. There is power to the plug that it is plugged in to. I have noticed that...Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t1360964-get_filter_stay_up_inside_cannisterI removed the filter from the CentraLux cannister on the wall, cleaned it and now can't get it to go back in and stay!Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t657359-electrolux_centraluxI have a Electrolux Centralux. When I plug the hose in at one of the wall outlets the motor will not start. If I go to the motor and slap the unit it will start.....then...it will not stop unless I unplug the power cord to the motor. If I plug the...Thu, 10 Dec 2009 20:49:33 GMThttp://www.fixya.com/support/t431224-electrolux_central_vac_floor_sweepThis is driving me nuts. The switch for the floor sweep does not turn the suction on or off...but when the vac is on in another part of the house, the floor sweep goes on (even when switch is set to off). Next, I touched the wires together and the...Thu, 10 Dec 2009 20:49:33 GMT