20 Most Recent
Brandt WFH1276F Front Load Washer Questions & Answers
All the washing is in the drum, can't open the
Hi from retired Englishman in SW France,
I would gently suggest as a first step that you clean the drain motor/pump lint tray/filter. So many 'faults' are caused by blocked filters and many machines will not even go to rinse or spin or release the door lock if there is any water still left inside.
Here are my complete and generic guidance notes for checking both the drain motor filter and the drain motor ;-0)
If you are unsure where the filter is, it is often behind the front lower (kick) panel (or in some machines at the rear in an awkward position!). These panels are either held on by (plasic) screws or will just pull off. Most filters are held in by a round cover/knob. Sometimes the filter will not come out with the cover and you will have to persuade it to come out to play.
REMOVE POWER AND ENSURE YOU HAVE A WATER RECEPTACLE/RAGS TO SOAK UP THE WATER WHICH IS BOUND TO POUR OUT (alternatively use a wet vac as sensibly suggested by VinnyB1234!)
It's surprising what people have found in theirs! It is always worthwhile checking it on a regular basis.
Now- whilst the filter is removed it is normally possible to see the drain motor and ensure it is not jammed by a foreign object such as a needle or a toothpick. It should be able to be turned by hand/finger- the power IS OFF!
At this point it is also possible to test if the motor works. No clothes or water in the machine, select a spin cycle and put the power back on. You should be able to see the motor turning at some point, possibly straight away. Using something suitable like a glove see if it is easy to briefly slow the motor down. If it is easy then the motor is malfunctioning.
If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C
Padlock sign has turned red and washing machine doesn't work
This is Joyce
try to unplug the washer for 1 min and replug back hopfully that will do the trick. if not go online to brandt.com and put in your model# and download you model# and download your manual to get information on your model to unlock.
hope this helps
thanks
joyce
Why does my Brandt top loader washing machine WTC9670 keep on making fuse box trip?
The modern fusebox contains two types of breaker; the micro circuit breaker (mcb) that replaces the old fashioned fuse and the residual current device (rcd) and which one trips indicates the type of fault.
The mcb trips in response to an overloaded circuit or short circuit and the rcd trips when current leaks from the circuit to ground.
When a washing machine does this there is a strong possibility some water has found a way to mix with the electrics. The first task will be to examine the power cord and then to remove whatever covers can be removed for a close examination of the internals looking for evidence of water...
Not finding what you are looking for?
