20 Most Recent Kenmore Front Load Washer - Page 2 Questions & Answers

0helpful
1answer

Kenmore front load washerdoesnt run it just makes a clicking noise. You push the start button and you hear the click when it locks the door. Then it just clicks and nothing turns on. sounds like it's

your having a problem with the water not coming in are u getting any codes? I would take the hoses off the back of washer and clean the screens in the water inlet value with old tooth brush if that's not the problem then u may need to replace water inlet
4/8/2014 6:08:48 AM • Kenmore Front... • Answered on Apr 08, 2014
0helpful
2answers

We have a Kenmore Elite

The symptoms are pretty specific for the F11 code on the Whirlpool Duet front loaders and clones (Kenmore Elite and KitchenAid): If the washer starts to fill but the drum NEVER moves, your MCU is bad If the washer runs through most of a cycle and then gives the F11 before (or during) a rinse or spin cycle, then you have the CCU relay problem. If you are interested in having me repair your CCU for you, I offer that service on eBay (website coming soon). My username there is "jhagner" Thanks
2/19/2014 12:38:23 AM • Kenmore Front... • Answered on Feb 19, 2014
0helpful
1answer

My he2t kenmore front load washing machine won't power on and there's a clicking noise

Vicki, i think that clicking sound is ok when you press start. TRY THIS. 1. close door securely 2. press power after putting detergent.3 After making your selction for different levels eg hot,warm cold, press START. usually these buttons are pretty reliable, GL
1/12/2014 4:43:38 AM • Kenmore Front... • Answered on Jan 12, 2014
0answers
0helpful
1answer

Kenmore 44152 model

I have the same problem sometimes but it goes away.. I can only bring it down to heavy loads that are uneven.
1/8/2014 7:31:54 PM • Kenmore Front... • Answered on Jan 08, 2014
0answers

417 4415 2400

Be the first to answer 12/27/2013 3:30:18 AM • Kenmore Front... • Posted on Dec 27, 2013Be the first to answer
0answers
0answers
0helpful
1answer

417 44152400 21 code reads e63 and machine not

Good Day, Your washing machine is fully automatic? the washing cycle is normal? if yes do the same maybe it will help you. for the fully automatic washing machine mostly have drain pump, please check the filter of your drain pump, how? remove the cup of your drain pump like a ordinary cup, screw it clock wise or counter clock wise. Remove drain pump filter and clean it, some hair pins, cotton buds or coins or any small item that coz of clog up. if your washing machine dont have drain pump ,but fully automatic check the drain motor if running or not? how? open the back cover for top loader washing machine only, select spin cycle and press start to see the drain motor running? the drain motor is like a small box with small wire to pull the lever of the drain to remove water inside, if the motor running or pull the lever of the water pipe but water still inside the washing machine, remove the drain cup or cover and clean it or check if have coin or cloth inside that coz of clog or water stuck, if the drain pump or drain motor is weak this is will cause and long time draining or totally not running the drain pump or drain motor and its cause of totally stop the cycle of washing machine in rinse time or spin time, because all fully automatic washing machine, after washing cycle the drain pump or drain motor must be on, to remove water before start the next cycle. rinse or spin cycle.check in the manual for the error code most of washing machine if the error code is in users manual its means its only minor problem,but if the error code is not in users manual its means you need to call an service technician to not waste your money or time if you do by your self.
11/2/2013 9:00:51 PM • Kenmore Front... • Answered on Nov 02, 2013
0helpful
1answer

Model Kenmore 48102700 front loading washing

Remove the metal panel below the door... should be 3-4 screws. Once removed, you'll see the pump which contains a clean out plug on the front. Just twist it out and you'll find the screen, a bunch of lint, maybe a sock or two, and maybe some loose change. The only trick is catching the residual water that will come out of the pump when you remove the clean out plug. Try a shallow baking pan or something similar to catch the water. Assembly is the reverse of what you just did.

Good luck.
10/25/2013 10:26:08 PM • Kenmore Front... • Answered on Oct 25, 2013
Not finding what you are looking for?
Kenmore Front Load Washer Logo

346 questions posted

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenmore Washing Machines

  • Kenmore Washing Machines

Most Popular Question

kenmore 40272900 front loading washer

  • Washing Machines
Loading...