20 Most Recent
General Electric WHDSR316G Top Load Washer Questions & Answers
My ge whdsr 316G washer is extremely noisy when agitating
Most likely your transmission is about to fail, Run it into the ground if you can stand the noise. Prepare for transmission replacement.
Online applaince parts are usually very helpful. Parts probably $200. plus. If you are tool literate, you may be able to do it. If not I don't recommend. You might want to consider a lightly used replacement, or New.
A WASHER THAT DOESNT DRAIN WATER ?
The pump housing could be clogged with food. You can sometimes Access the strainer from inside the dishwasher. If that looks ok you will need to look at pump below by removing the hose clamps and checking the pump intake. If all that looks good you could have a bad solenoid or pump.
Not spinning
If its a front load, do you know about the clean out drain behind the lower front panel? Get ready with a bucket to catch all the water, lint, money and bobby pins coming at you. Under the door there is a panel, you will need a screw driver to get it off. Under that panel is a knob to unscrew a pull out.
Doesnt agitate or spin.
Mine is 1 1/2 years old and this worked for me
unplug from power for at least 30 seconds
turn the dial to spin but don't pull out
plug back in to power and open and shut completely so switch is engaged solidly 11 times in 15 seconds.
pull out knob to turn on
This should clear a error code.
hope it helps!
No spin or agatae
Unplug machine. Change load type to medium. Clean door sensor. Set knob to drain and spin. Plug machine back in to powr. Open and close door 10 times in 15 seconds. Pull knob to activate drain and spin.
I have a GE washer WHDSR316G1WW and I cannot get a
You are correct in that the belt seems overly tight. This is what I did.1) Get the belt on the large pully2) Using several ZIpTies every few inches, secure the belt to the pully3) Get a metal hanger and loop it through the belt making a safe handle at the end.4 Cover the handle with a cloth to protect your hands and to also provide grip.5) Have my 300 lb, 6'7" hulk of a son pull as hard as he can while you assist getting the belt on the motor spindle.
SHOULD WASHER STILL HAVE WATER
NO, after the last rinse and before the final spin the machine pump should pump all of the water out of the machine. most likely the timer.
Not finding what you are looking for?