20 Most Recent
Praktica DCZ Digital Camera Questions & Answers
Praktica DCZ8LM switches off nearly
If you can, after switching on, quickly press to go into settings, and find the timer switch off spot, and adjust it to make it turn off to never, if possible, and see if that helps. If it does, go back and adjust again to a lesser time like two minutes, or your camera will eat batteries.
Red lights says busy, camera wont turn on,,,,,,,,,,,
The problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera which can prevent the full power of the batteries from flowing into the camera.
Here is a fix :
Remove the batteries and wipe the camera contacts firmly with a dry cloth (heavy corrosion may require cleaning with a wire brush, steel wool, or sandpaper).
Remove any residue that may have fallen into the battery compartment during cleaning, then wipe both ends of the batteries and place them back in the camera.
This cleaning clears the problem about 90% of the time. If it doesn't work for you, your batteries may need to be replaced.
Praktica dcz 8lm camera: when turned on the light
Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera
which can prevent the full power of the batteries from flowing into the
camera. Try this free fix before you do anything else: remove the batteries and wipe the camera contacts firmly with
a dry cloth (heavy corrosion may require cleaning with a wire brush,
steel wool, or sandpaper
). Remove any residue that may have fallen
into the battery compartment during cleaning, then wipe both ends of
the batteries and place them back in the camera. This cleaning clears
the problem about 90% of the time. If it doesn't work for you, your batteries may need to be replaced, or the camera may have
a problem that requires professional repair.
Screen turns on for about 2 seconds, then turns
this sounds like the baterys are going down,, ie flat! you may also be using the wrong type of baterys in it, they eat normal one's!! only use high power type not ni-cads
also look at the programer is it set up in power saving mode??
Lost my photos i cannot get them back
ALTERNATE WAY TO TRANSFER PHOTOS TO COMPUTER If your photos are stored on the memory card, then remove the memory card from the camera and insert it into an USB memory card reader. Connect this USB memory card reader and memory card into the USB port of your working computer. Your computer will see this as an USB Mass Storage Device or an external storage device; you can then open the folder on the memory card and copy the photos to your computer. Memory card reader is a handy device and is inexpensive. You can copy photos from other cameras and you can also download photos off your memory card to someone else's computer without the need of installing any programs.
Not finding what you are looking for?
May be this will help a little bit. Manual can not be found.
