UTStarcom Blitz Cell Phone - Answered Questions & Fixed issues

the only way to change that password is to send it into verizon.

This option allows you to transfer music files from your PC. In order to use this option, you must install V CAST Music with Rhapsody on your PC. 1. Open V CAST Music with Rhapsody software. Don’t have V CAST MUSIC with Rhapsody software? Download it for free at www.verizonwireless.com/music. 2. Install the device USB drivers before connecting your phone to a PC. USB Cable and Device Drivers can be purchased separately via the Music Essentials Kit compatible with this device. 3. From the main screen on your phone, the SYNC MUSIC V CAST MOBILE PHONE display appears. Your phone should display the message: Connected. Connection may take a few seconds. 4. Drag and drop the song(s) you want to sync from My Library, to your V CAST Music with Rhapsody mobile phone, listed under the Sources tab. Once synchronization is complete, press the END/Power Key and disconnect the USB cable (purchased separately). 5. Under the Music & Tones menu, open My Music to view and play your music. • A compatible USB cable (sold separately) is required for syncing. • Music can also be purchased via V CAST Music with Rhapsody through your PC.
Hope this helps, let me know if I can help you with anything else.
JimmyC

Sorry we can't help with that.

Hi if you are looking for code to unlock your pantech phone from its present network ..Then have a look at sites like Mobile-Unlocker.com here they are rendering unlock code for all mobile models at reliable cost .You first verify that whether they are rendering code for your mobile model, country and network.if yes then pay for it and unlock your phone ...

ha ha ha as you like i think you need to check battery first, if it shows in the screen that the battery still charging all they long but actually a faulty battery doesn't charge..

If you are blocked by a firewall try changing the IPaddress according to your location You can find an up-to-date list of all the AWS EC2 IP addresses here: https://forums.aws.amazon.com/ann.jspa?annID=1528 All Blitz HTTP requests will originate from these IPs.

screen still black / white it's not a screen problam .it's belt problam change your belt of cell who connect your slider to your keypadthat belt.

what so i do if i don't remember my security code?

lol i did the same thing, and mine didnt work anymore so i just broke the p.o.s.. i opened it up and theres something that has to hit a certain post and you may have knocked that off place and or there is also a ribbon wire that may have become destroyed or damaged from a partial cut and or rip. sorry buddy. ure sol

try one of the search engines u'll need make and model number

what is the password

You can get the unlock code through online..........give your IMEI number and get the unlock code for ur mobile.... i will suggest the website Unlock-Zone.com which is doing good service .....you can approach this website.
This site is nearly perfect and they were recommended highly in the cell phone forums. I used them to unlock my cell phone. contacted them and within 30 mins i had my unlock code and my phone was unlocked.
Hope this helps.

You can get the unlock code by contacting your current service provider customer care department. If your phone is locked you can use any of your friends phone to make this call. The service provider will then provide you the unlocking codes. Everything is done for free of cost and you are not going to be charged for this process.

Another alternative is, you can take the phone to any authorize phone service center to help unlock the phone, because to unlock your phone, you will need some kind of software, USB cable etc to unlock the phone, so you can also go a nearby phone service center to unlock the phone, but calling your network service provider is the best because they have the records of your phone and can easily help to unlock it. This are the two reliable means you can unlock your phone.

For this problem contact your mobile service provider........

Generally a phone should not overheat. They get very hot but i've never actually seen one overheat to a level where it damages hardware. It is more likely that the battery has overheated and sacrificed itself instead of the phone. You could try a replacement battery to see if that solves the problem (if you can replace them yourself that is!).

However if the phone is actually fried then I'd bet it is cheaper to buy a new one than diagnose the burnt out piece and replace it.

When I was programming phones, my best resource was this website:

http://www.cellphonehacks.com/

Thanks! :)

Good luck!

airindanyell Did you get this problem fixed? I am having the exact same thing happen to me.

This sounds simple ... replace your battery.

Thanks for your question @ FixYa.com

If you have insurance on the phone I would go for the easy way first. They usually ship within 24 hours and you are back in business. If you don't have insurance, the only thing you can do is gently open the cellphone by popping open the cover.......gently. Take a hairdryer on low speed and low heat and try to dry the inside of the phone. Let it sit for a couple days after drying. Put the cover back on and try it again. Dry the battery as well,DO NOT open the battery! Bottom line,you may be looking at a new phone. The insurance route if applicable, is the way to go. At least you know its a new. Hope this helps.

configure received message settings:

1. From standby mode, press the OK Key [OK] to unlock the keypad,

then press the Left Soft Key [Message], then the Left Soft Key

again for [Settings].

2. Press the Directional Key up or down to highlight one of the

settings below, then press the OK Key [OK] to select it:

ENTRY MODE

Sets an Entry Mode as a default. For example, if Abc Mode is the default, its icon

will appear.

1. Select "Abc", "ABC" or "123" by pressing the Directional Key up or
down then press the OK Key [OK].