http://www.fixya.com/support/p1116635-generac_guardian_ultra_source_15_000_watSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSat, 26 Dec 2009 07:01:14 GMT80http://www.fixya.com/support/t3236105-generac_np_50g_stops_after_2_30minI just bought a RV with a Generac NP50G with about 500hrs. It will run for 2min to 30min fine then shut down, work fine with load. Checked the overheat sensor and it is disconnected so not the issue. Though it might be fuel filter but it stops...Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t2741678-fuse_blows_repeatedlyGuardian Ultra Source 15KW, about 20 months old, but only about 5 hours total run time (start it occaisionally to charge battery). With a new fuse installed, unit will start and run at full speed. If I select idle control, unit dies -- fuse is blown....Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t2423291-dont_12_volts_start_switch_generacbattery is good. trace wire to relay in control box, no power to on off switch in front, wont start. can jump at starter to spin over but no power to fuel solenoid. 15000 wattsSat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t1929278-generac_15000_watt_portable_generatorI have a Generac 15000 watt portable generator. It cranks great, but will not start. The plugs are wet, doesn't seem to be getting any spark. Have replaced plugs, any suggestion.Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t1095591-waterproofing_house_stuccothere are many cracks in the stucco covering the outer walls of my house causing rain water, pushed against the walls by the wind, to drip on the back of the drywalls and enter the house from the bottom under the baseboards. i had gutters and...Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t1096149-tile_floor_installingplease tell me the steps to take to do my own home installation of a tile floor in ont of my fireplaceSat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t1126457-trigonometric_functionwhat are the reciprocal relation?Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t1169905-dario_grade_o_meter_instruction_manualHi I acquired a used Dario grade O meter. This is a manual method of growing clothing patterns that has mainly be replaced by CAD systems. I can use it without the manual, but I am trying to get one to make the machine complete. I have been unable to...Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t1179779-awning_fixed_existing_brick_retainingI am constructing a flat roofed (scillion) awning. The highest point of the awning is attacked to the house and the lowest point is supported by 90 x 90 timber posts. These posts are on metal feet which are sitting on top of a existing brick...Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t1408957-need_instruction_17_ft_cosco_ladderjust bought a 17 ft ladder and the instructions are all oren into pieces. would like to have another set of indtructions if at all possible. thank you.Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t1481035-need_build_ramp_hot_wheels_cari need to build a ramp with a loop in the middle for a hot wheel for my physics classSat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t1510207-missing_tool_bar_document_pageI can't find out how to install the tool bar on the document page for my typing.Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t1577817-missing_thimble_screwI have a Mitutoyo NO. 126-137 SN 6044681 Pitch micrometer. The end screw to hold on the ratchet thimble is missing. Where do I get a spare?Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t1699111-need_get_good_old_dro_work_againI have a Mitutoyo PLL32L ( S/no. 900185 ) Linear scale fitted to a Colchester Chipmaster Lathe with cross slide and bed scales. It used to work 100% before my workshop move. Now when I plug it all in all ( after 2 years in storeage) I get are rows of...Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t1828297-vinyl_kitchen_flooring_loosening_seamVinyl kitchen flooring is loosening at a seam. What do I apply to to reseal? How?Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t1978745-need_copy_smith_s_precision_sharpeningneed a copy of smith s precision Sharpening kit instructions, as lost mine in moving.Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t2466355-crosshairs_old_craftsman_transitthe crosshairs on my old craftsman transit level model number 789.46161 fell off. does anyone know where i can get parts for this transitSat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t2546137-meter_not_work_openMeter does not work.......how do you open the case?Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t2778143-given_mitutoyo_caliper_said_newI was given a mitutoyo caliper said it was new and never used the battery was dead I put a new battery in it and found that the second digit from the right is not all there in mm or in.Is it something that can be fix?Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t2223015-laser_not_workingi left the batteries in my baby laser level and they leaked now my level doesnt work is there any one local to the midlands where i can send it to get repaired.Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t2343395-conversioni need to know what 12ft x 18ft would be in square meter?Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t2888369-k17_shedI have a absco K17 shed and have lost the instructions where can I download the assembly instructionsSat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t2889943-like_readable_owners_manual_ryobywould like a readable owners, manual for the RYOBY SW-113JSat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t2989137-although_tradesman_moterhomde_pluggedalthough tradesman moterhomde plugged into electrical, engine's battery loses power, any suggestions as to why?Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t3007921-dropped_starrett_2_3_micrometer_now_offdropped starrett 2-3 micrometer now they are off by .005 at 2'' they read 1.995 I know you can adjust the thimble but that would put them reading in an awkward position, I'm at the point of just short of pressing them just to get that .005. Any...Sat, 26 Dec 2009 07:01:14 GMThttp://www.fixya.com/support/t3013657-read_multi_purpose_angle_finderhow do I read a multi-purpose angle finder? Do you take the top or bottom measurement as your angle?Sat, 26 Dec 2009 07:01:14 GMT