My S8 was off for about 2 years! Now I can't get the water to go through the coffee mode. I do get...
(More)
My S8 was off for about 2 years! Now I can't get the water to go through the coffee mode. I do get the tea potion and limited steam potion. Any ideas?
I have an Jura Impressa S8 and the coffee it produces has always had a slightly oily flavor (a...
(More)
I have an Jura Impressa S8 and the coffee it produces has always had a slightly oily flavor (a machine oil flavor). I have washed the machine several times by putting the tablet into the coffee grinder and that has not changed the result. I have also tried the unit with and without the filter, and different types of water (plain tap, distilled, externally filtered, etc). The oily taste is present regardless. I have also tried several different coffees from different sources (Peet's, Starbucks, other specialist producers brands, etc). The oily taste persists. Any suggestions?
I have run the clean process with the tablet 2 X , but the machine keeps beeping to be cleaned. I...
(More)
I have run the clean process with the tablet 2 X , but the machine keeps beeping to be cleaned. I use brita filtered water & thought to decalcify the machine for the 1st time. Maybe that will help, but do you use the liquid that the manual says(durgol), or the decalc tablets Williams Sonoma says to use? Anyone else have their machine want to be cleaned over & over?
Aftter 2 years, my Jura Capresso S8 has just developed the same problem. I use the Claris filters, so I doubt it is a problem with calcification. The time before this, it made me clean it twice and then the message went away, not it keeps saying "Clean Unit" no matter what I try.
I have to fill the system ,because I was some time away. I Filled the water tank. Then I pressed...
(More)
I have to fill the system ,because I was some time away. I Filled the water tank. Then I pressed steam, It is working some time, no steam comes out then it shows again fill system
Impressa S8. Saying "Fill System -- Press Steam." There is water in the container and we...
(More)
Impressa S8. Saying "Fill System -- Press Steam." There is water in the container and we keep pushing the steam button, as instructed. Machine makes a noise but returns to "Fill System -- Pres Steam." Am concerned that the pump is not working -- that water is not going through the system. No steam comes out when we press steam button.
i am reassembling a jura s8. the problem i'm having is deciding which tube goes into which hole of...
(More)
i am reassembling a jura s8. the problem i'm having is deciding which tube goes into which hole of the distributer located behind the steam selector switch. there is a round plastic piece with 4 holes into which varioius tubes fit. there are too many combinations for a trial and error approach since i have to reassemble the machine to turn it on for a test run. i haven't been able to get my hands on a repair manual. jura seems very proprietary with their gear.
All of a sudden I had no steam and no water. I could hear the pump chugging and trying hard, but nothing came out of the nozzle. First, check to see...
written by very-very
Here's a few Tips for the countless number of people having problems with the Saeco Line Super Automatics Machines. These are more Suggestions if you...
written by EspRoastTech
Basing on personal experience (you can find more on Google probably), solutions are: On percolated (filter) coffee machines: Check water temp, if...
written by ginko
Symptom: keurig B100 coffee maker not brewing. If your brewer sounds like it should be brewing but little or no coffee comes out, the problem may be a...
written by Burnzy