http://www.fixya.com/support/p109460-kenmore_33721_upright_vacuumSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comMon, 07 Dec 2009 07:24:15 GMT80http://www.fixya.com/support/t2525779-hoover_wind_tunnel_not_turnWe have a Hoover Wind Tunnel Mach 4.7 that is 8-9 years old. It will not turn on. We have not had any previous problems. Is there a reset button or is the motor just bad? Should I be happy it lasted this long?Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t328245-vac_smokeingvac smells like it is burningMon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t238572-sudden_loss_suctionVacuuming debris from removal of carpet when cleaner hose became clogged. Cleared hose and replaced full bag. Cleaner does not have suction. Air coming out of vent in top of head.Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t144171-kenmore_33721_not_startI was using my Kenmore 33721 vacuum and it just stopped working (as if it was unpluged). I verified the outlet had power and tried to turn the vacuum on. Nothing. I tried in several other outlets. Nothing. I have taken care of the vacuum...Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t251981-dirt_devil_vacuum_belthow do I change this belt?Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t237397-hoover_steamvac_model_f5857_900will not suck up the water from the carpetMon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t244221-hoover_u9125_990z_vacuum_cleaner[URCHASED THIS MACHINE 6 MONTHS AGO AND NOW IT IS TOTALLY DYSFUNCTIONAL. IT MAKES A LOT OF NOISE, BUT CANNOT PICK UP EVEN THE SLIGHTEST BITS OF DUST, SCRAPS OF PAPER OR EVEN DUST THE OAK FLOOR. OUR HOUSE HAS OAK FLOORING EVERYWHERE SO WE USE ORIENTAL...Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t246371-kirby_g6_shampooerI need instructions as to how to put the shampooer together and if there is a way to make it compact enough to do stairs. ThanksMon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t247223-self_propelled_wind_tunnel_vacum_willWhy doesn't my self propelled vacum not move when handle is released,when both belts are intact and roller brush moves when turned on.?Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t249699-porter_cable_roofing_nailer_rn175aMy gun drive rod is not retracting, it fires fine but will not retract.Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t216009-bissell_proheat_9200my brushes started to jam and not turn, so i cleaned the brushes and parts and now the brushes dont work at all. please help.Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t227489-windsor_sensor_12_vacuum_no_poweri know I have power down to the last quick disconnect in the housing base. I take off the cover today and I have circuit boards, capacitors, ect., ect. I have a digital meter. Is there anything I can check and how to check? As in circuit board, burnt...Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t254405-remove_vacuum_roller_offHow do you remove roller. Powerline Limited Editon Model #4352 ThanksMon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t263819-power_consumption_refridgeratorsHi thereI am in the process of buying a generator for power losses (I live in a rural area) to ensure the Fridge and Freezer are kept running. I want to assertain the power (wattage) of my Refridgerators so I can ensure I buy an appropriately sized...Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t279367-manual_got_wet_need_new_oneThis is not a real problem for you, but I really need a new manual for my steamer.? Its a hand held household, model PS-3888 by Scunci.? The old book has ProSteam products on it.? It got really wet and I didn't know it.? Tried to open book and well...Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t279483-steamvac_f5870_900_trigger_mechanismI had a rattle in the handle portion of the steam vac so I took the handle apart (by reversing the assembly guide) and a small plastic piece fell out. I can not tell where it should go - there doesn't seem to be a place where it broke as the piece is...Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t283245-maybe_second_belt_or_pullyThe unit runs but the belt to the roller has broken. When I went to replace the belt I discovered the spindle that turns the belt is not turning. Is there a hidden belt that turns the spindle? What do I do here?Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t280155-hover_gold_steamvac_5_years_oldWhen I use the stemvac i get a noise, lke there is a belt slipping, with a hot belt smell. I can not find my manual , and cannot figureout how to find the belt if any.Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t280933-eureka_whirlwind_light_speedHow does the bottom of the vacuum open so I can change the belt?Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t286155-minuteman_ambassador_jr_shampooI have a minuteman ambassador jr. some one gave me a 15' hose attachment so that I could shampoo my steps and furniture. The machine has two hose already attach to it. I do not know which hose to unhook to attach the 15' hose to .Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t287105-kirby_sentria_not_distributing_shampooOur new Sentria is not shampooing correctly. It is dumping the soap and water in the center only, not a full width distribution. I cleaned filters like the manual says once before and it worked. Not this time. Any ideas?Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t289883-nylon_washers_bissell_9200there are two 4"dia. washers on each side on the pivot point where the handle is attached to the base these washes have slots cut into them do these slots need to line up in any particular fashion when the handle assembly is reattached to the base?...Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t300693-changing_beltHi my name is Sharon I have a Eureaka Upright Model number: 2991AVZ. Can you guide me and how I can locate my belt so I can change it. Thank you.Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t304313-vacuum_cleaner_repairLOUDER THAN USUAL MOTOR BAG EMPTY FILTER CLEAN CAN'T REMOVE TOP COVER TO CHECK MOTOR WORRIED THE MOTOR WILL BURN OUT SUCKING IS WEAKER THAN USUALMon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t312011-eureka_4467av_upright_vacuum_userdo you have one you can email to me.. I am having trouble trying to figure out how or where to open my vacuum up from to feplace belt kuntripoolgal@yahoo.comMon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t313327-engaging_belt_kirby_g5I can't get the front of my Kirby back on properly so the belt is connected.Mon, 07 Dec 2009 07:24:15 GMThttp://www.fixya.com/support/t322583-hoover_upright_windtunnel_isntit has suction, it just wont go foreward and its hard to push. i opened the bottom part and saw that the v shape belt was loose but i dont know if thats all i have to do. i cant find a manual online for u6470-900 hoover. should replacing that one...Mon, 07 Dec 2009 07:24:15 GMT