http://www.fixya.com/support/p109394-kenmore_23613_progressive_powermateSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSat, 26 Jul 2008 15:25:24 GMT80http://www.fixya.com/support/t579896-broken_power_head_beltI need to replace a broken belt and i don't know how the power head come apart? I have lost the book on my vacuum and need to replace the belt. Can you help me?Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t465291-brush_motor_doesnt_workthe brush motor only works when then handle is upright. anytime i lower it at all the motor turns off. it still has the suction but the brush motor is off.Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t327811-broken_vacuumjammed the rotating brush on a kenmore powermate vacuum cant get it to run properly after clearing the jamSat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t135010-retractable_cordI am trying to replace the retractable cord on my vacuum, but I don't know which way to wind it. I have tried both ways and it still doesn't seem to work.Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t118895-off_switch_needs_repairI have a kenmore progressive bagless & the on/off switch just quit working. It isn't that old of a machine, maybe a year old. It makes a loud click when I slide the on/off bar back & forth. I can't figure how to get the front part of the handle...Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t102710-replacing_off_switchI actually have a model 23612001 Kenmore Progressive Vacuum but do not see it listed. It appears that it is of the same general design as this one. I need to take the handle apart to get at the power switch. I've removed the three screws that...Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t14279-feeling_original_problem_resultI have a feeling the original problem was a result of vacuuming up dog hair (I have 2 huskies), but I always kept the roller clean of hair . If anyone can suggest a cause for the problem, which part is burned out, a way to fix it or a better vacuum...Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t192503-unable_extract_waterI am able to shampoo but the unit is not extracting the water from the carpet.Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t192689-black_decker_gw150_forgotten_startI have had this model for several years but have not used for a while. I was wondering if you could help me start it. As I Have Forgot. This Isnt A House Vacuum It Is A LeafBuster Black And Decker Gw150Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t195629-oreck_vacuum_troubleshootingMy Oreck Upright has started spitting out what I want it to suck up. I'm going to try replacing the belt, but someone suggested it is the start of a bigger problem - motor burnout?Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t227489-windsor_sensor_12_vacuum_no_poweri know I have power down to the last quick disconnect in the housing base. I take off the cover today and I have circuit boards, capacitors, ect., ect. I have a digital meter. Is there anything I can check and how to check? As in circuit board, burnt...Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t238553-help_needed_prontoim making a science project ..which need a vacuum cleaner.how can i make the vacuum cleaner to blow out instead of sucking in..plz help me i have juzt got 1 week!!Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t246371-kirby_g6_shampooerI need instructions as to how to put the shampooer together and if there is a way to make it compact enough to do stairs. ThanksSat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t247223-self_propelled_wind_tunnel_vacum_willWhy doesn't my self propelled vacum not move when handle is released,when both belts are intact and roller brush moves when turned on.?Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t247385-bissell_carpet_cleaner_spray_water_orMy Bissell proheat clearview carpet cleaner stopped spraying water and cleaner. I replaced the pump but it still does not work. It is only about a couple of years oldSat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t251981-dirt_devil_vacuum_belthow do I change this belt?Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t254405-remove_vacuum_roller_offHow do you remove roller. Powerline Limited Editon Model #4352 ThanksSat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t263819-power_consumption_refridgeratorsHi thereI am in the process of buying a generator for power losses (I live in a rural area) to ensure the Fridge and Freezer are kept running. I want to assertain the power (wattage) of my Refridgerators so I can ensure I buy an appropriately sized...Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t265943-hoover_wind_tunnel_upright_selfHi, I have the above vacuum and I have LOTS of suction with the hose and absolutely NONE with the upright. All belts are fine, no obstructions anywhere, dirt cup, filter and pre-filter all in place and working properly. When the dirt cup is removed...Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t266261-oreck_vacuum_troubleshootingMy Oreck Upright has started spitting out what I want it to suck up. I'm going to try replacing the belt, but someone suggested it is the start of a bigger problem - motor burnout? How do I replace the belt?? Brush?Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t277931-install_new_4476_beltA burning rubber smell tells me my vac ate the belt. I can't open the vac to install a new belt.Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t287105-kirby_sentria_not_distributing_shampooOur new Sentria is not shampooing correctly. It is dumping the soap and water in the center only, not a full width distribution. I cleaned filters like the manual says once before and it worked. Not this time. Any ideas?Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t287249-reverse_vax_2000_vacuum_cleaner_pump_upim wanting to blow up an inflatable pool can you tell me how i can do that with the vax 2000 if i cant with that one what about the genius 2400 bagless thanks heapsSat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t289883-nylon_washers_bissell_9200there are two 4"dia. washers on each side on the pivot point where the handle is attached to the base these washes have slots cut into them do these slots need to line up in any particular fashion when the handle assembly is reattached to the base?...Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t291659-weird_noisei have a eureka the boss and i am getting a weird noise figured bag was full needed to change it so i did. Noise persisted so i checked make sure nothing was caught in the brushes. I even checked the belt it was fine replaced with a new one.Still the...Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t296039-steam_cleanerwill not heat up waterSat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t302573-wet_dry_vac_suction_not_wokingWas left with water inside possible filter damage? Mold? water coming out blow hole and little to no suction.Sat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t304313-vacuum_cleaner_repairLOUDER THAN USUAL MOTOR BAG EMPTY FILTER CLEAN CAN'T REMOVE TOP COVER TO CHECK MOTOR WORRIED THE MOTOR WILL BURN OUT SUCKING IS WEAKER THAN USUALSat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t312011-eureka_4467av_upright_vacuum_userdo you have one you can email to me.. I am having trouble trying to figure out how or where to open my vacuum up from to feplace belt kuntripoolgal@yahoo.comSat, 26 Jul 2008 15:25:24 GMThttp://www.fixya.com/support/t321977-vacuum_shooting_out_dustmy vacuum cleaner keeps shooting dust out of the sidesSat, 26 Jul 2008 15:25:24 GMT