http://www.fixya.com/support/p109359-kenmore_25812_25813_progressive_baggedSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comMon, 28 Dec 2009 03:41:50 GMT80http://www.fixya.com/support/t3328937-when_using_vacuum_25812_powermateWhen using the vacuum (25812) with the powermate, the power shuts off - now it just stays off. The PM Jr. works.. could this be a problem with the wand rather than the powermate unit?Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t1095798-kenmore_model_116_powermate_jr_stoppedThee powermate jr no longer works with my vacuum. I opened it and the belt isn't broken though, imho, I think the belt is a bit loose. Can that be replaced? I love this vacuum and don't want a new one, and having two cats in the house this attachment...Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t1870472-kenmore_progressive_vacuum_need_replaceOne of the prongs on the plug snapped off. Should I replace the entire cord or splice a new plug onto the existing cord?Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t1649395-plastic_bag_stuck_in_hosethe bag held the newspaper, so it is 18" long by 4" wide.Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t995713-vacuum_shut_offMY VACUUM WON'T SHUT OFF EVEN AFTER SLIDING THE "ON/OFF" SWITCH INTO THE "OFF" POSITION. I HAVE ALREADY REPLACED THE ELECTRONIC SWITCH (SEARS #8191600) TO NO AVAIL. PROBLEM STILL PERSISTS. SHOULD I REPLACE THE WIRE HARNESS (SEARS #...Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t613085-kenmoore_canister_25812_failureThe LED lights located on the extended hose do not light up when the cannister is operating and the entire agitator housing is dead...that is it does not work when the vacuum is turned on. Checked contacts...clean. Is there a circuit breaker for...Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t744625-burning_smell_from_motor_needsThere's a burning smell coming from the canister, and the motor's speed sometimes drops. I'd like to buy a replacement part and fix it, but I'm not sure what went bad. Brushes, maybe?Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t336606-no_suction_says_bag_fullI just changed the bag...properly and when I switch the vacuum ON..it reads bag full and has no suction. What have I done wrong?Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t151108-blows_dust_dirt_out_brush_areaMy vacuum is sick! When I try to vacuum with it, all that happens is that it blows dust and dirt into the air. It does suck up some stuff, but leaves large clumps of cat hair afterwards. I have cleaned the hoses, filters, and changed the...Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t421829-carpet_function_rollers_dont_turnWe have a Kenmore progressive with a power-mate attachment. when the carpet function is turned on, the light lights up and I can hear an increase in power but the roller doesn't turn. any advice? it was turning but when I rolled it from a carpet to...Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t271357-belt_repairhow do i replace the belt on kenmore canister progressiveMon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t227489-windsor_sensor_12_vacuum_no_poweri know I have power down to the last quick disconnect in the housing base. I take off the cover today and I have circuit boards, capacitors, ect., ect. I have a digital meter. Is there anything I can check and how to check? As in circuit board, burnt...Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t246371-kirby_g6_shampooerI need instructions as to how to put the shampooer together and if there is a way to make it compact enough to do stairs. ThanksMon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t247223-self_propelled_wind_tunnel_vacum_willWhy doesn't my self propelled vacum not move when handle is released,when both belts are intact and roller brush moves when turned on.?Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t251981-dirt_devil_vacuum_belthow do I change this belt?Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t254405-remove_vacuum_roller_offHow do you remove roller. Powerline Limited Editon Model #4352 ThanksMon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t263819-power_consumption_refridgeratorsHi thereI am in the process of buying a generator for power losses (I live in a rural area) to ensure the Fridge and Freezer are kept running. I want to assertain the power (wattage) of my Refridgerators so I can ensure I buy an appropriately sized...Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t287105-kirby_sentria_not_distributing_shampooOur new Sentria is not shampooing correctly. It is dumping the soap and water in the center only, not a full width distribution. I cleaned filters like the manual says once before and it worked. Not this time. Any ideas?Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t289883-nylon_washers_bissell_9200there are two 4"dia. washers on each side on the pivot point where the handle is attached to the base these washes have slots cut into them do these slots need to line up in any particular fashion when the handle assembly is reattached to the base?...Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t304313-vacuum_cleaner_repairLOUDER THAN USUAL MOTOR BAG EMPTY FILTER CLEAN CAN'T REMOVE TOP COVER TO CHECK MOTOR WORRIED THE MOTOR WILL BURN OUT SUCKING IS WEAKER THAN USUALMon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t312011-eureka_4467av_upright_vacuum_userdo you have one you can email to me.. I am having trouble trying to figure out how or where to open my vacuum up from to feplace belt kuntripoolgal@yahoo.comMon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t322583-hoover_upright_windtunnel_isntit has suction, it just wont go foreward and its hard to push. i opened the bottom part and saw that the v shape belt was loose but i dont know if thats all i have to do. i cant find a manual online for u6470-900 hoover. should replacing that one...Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t339863-dysin_vacuum_blows_air_instead_suckingHi - I have a problem with my Dyson vac, it appears to be blowing air instead of sucking it. Any ideas? Cheers. Was clogged up with shredded paper. Cleaned it out and is now blowing instead of sucking air.Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t343589-big_green_machineHow do you put the hot clean water into the Bissell Big Green Machine. It's a second hand machine and I have no instructions. Can you help me?Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t347909-given_hooverI was given a Hoover model 450 vacum cleaner i am looking for information aout this productMon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t362261-kenmore_progressive_canisterHi there - My vacuum won't turn on unless the power brush is attached. When it does go on, there is no power in the power brush (the brush does not turn). I hear a flipping noise in the canister (like a broken belt). Do you have any idea why I'm...Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t373547-craftsman_vacuumI need to see a manual to get parts for craftsman vacuum model 11317060. Serial number 00259v2279Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t381119-instruction_manual_eureka_409bIt's not picking up good. I cleaned all areas and still not picking up. I have no manual because it was given to me. The motor is working .Mon, 28 Dec 2009 03:41:50 GMThttp://www.fixya.com/support/t396275-eureka_vacuum_belt_replace_model_4688My vacuum is not picking up.Mon, 28 Dec 2009 03:41:50 GMT