20 Most Recent
Saeco Royal Digital Plus Coffee Maker/Espresso Machine - Page 7 Questions & Answers
Can't remove the brew unit
I ran the machine again using a plastic card to activate the micro switch for the dregs unit and it recycled the brew unit to the correct position so that it could be removed.
Seaco Royal grinder not working
This FixaYa site is the biggest scam ever, nobody ever answer to any qwestions, the existing qwestions are posted and answered by the same idiot logged in under a diferent name. i'm sory to say i payed $14.99 for live chat and nobody ever answered, after one hour of waiting like a fool my live chat sesion expierd so i e-mailed FixYa support about it but nobody ever answered. There is no refound also since you can't get nobody to talk to you. So don't pay here or you'l get scamed.
The mahine does not froth
alisha165,
the saeco royal digital dosn't froth milk.... it produces steam, you are the one that froths the milk. is the machine still producing steam? if not you will need to have your steam boiler replaced. This should only be dune by a qualified repairer. If it is still producing steam but it is not as good as it use to be, descalling you machine may help.
Instructions for descaling Saeco Royal Digital
I used to run vinigar and water thru my coffee maker to remove the **** vinigar is slightly acidic. make sure run just straight water thru it afterward to get rid of the taste.
Robert
Brew unit miss
Mine is doing the same, keen to see a resolution to this!
Steam Wand broken
Hi,
I think you have a tube in the machine from the rapid steam boiler that is blocked.
Best regards
/Mirran
Saeco Royal Digital has steam
Hi,
I think you have a pipe leakage.
Take of the top and see how it look inside, if you have a leak then it will go down to the power button and you will have a short circuit.
Saeco royal
Hi,
Try to set the grinder to grind coarser, make 2-3 cup of coffee to get coffee with the new settings.
/Mirran
Ventilating
Hi,
How old is your machine?
How often descale you the machine?
Calcium is a very big problem on all espresso machines, try to descale it.
If it not help then it can be stop in a pipe or you have to replace the magnet valve in the machine.
Let me know if you get it to work again.
I´m not online all the time but i check here regulary.
/Mirran
My Saeco Royal Digital Plus
Hi,
- Check the magnet in the water tank and make sure it is on top when your tank is full.
- It can be the water sensor in the machine.
Not finding what you are looking for?