20 Most Recent KitchenAid KGRA806PSS Gas Kitchen Range - Page 8 Questions & Answers

Unplug for a few minutes and see if it unlocks when plugged back in

Check the owners manual or the manufacturers website for error codes. However, it sounds like the control board is bad. Good luck...

Maybe or othe electric components..unplug bfor lookn. Library has repairbooks

I just started 6 weeks ago and I've gotten 2 check for a total of $2,200...this is the best decision I made in a long time! "Thank you for giving me this extraordinary opportunity to make extra money from home. This extra cash has changed my life in so many ways, thank you!"--- Visit site: w­­w­­w­­.SalaryHD­­.­­C­­o­­m

Assuming it’s electronic lock and not manual, problem would either be lock motor, control board or latch not lining up.

Try unplugging the oven from power for 5 min's

What is a "Sabbath" button for.

Most likely bad control, but Check for loose wire connections on control.

Error code f15 'Frigidaire FEB30T7FC Stainless Steel ...

www.faqqq.com/.../error-code-f15-frigidaire-feb30t7fc-stainless-steel-ele...

Error code f15 'Frigidaire FEB30T7FC Stainless Steel Electric Double Oven ... I'mtrying to open up a Unity3D game.exe that is on a remote computer through my main desktop. ... How 2016 will be the start of your virtual reality future - CNET.

Kenmore range shows f15 error code - ApplianceJunk.com

appliancejunk.com > ... > Forum Index > Range, Oven & Cooktop Repair

Oct 31, 2010 - 10 posts - ‎5 authors Kenmore range suddenly started flashing f15 error code. With Thanksgiving just around the corner, i need help with this repair. Thanks.

You have a bad control, also called an infinte switch, that needs to be replaced.

Whole Clock / Control will have to replaced.

notify manufacturer for that type of manual

http://www.manualsbase.com/manual/399634/range/kitchenaid/keri500,_kerc500,_kers507,_kerc507,_ykeri500,_ykerc500,_ykers507,_ykerc507/

This would indicate a new control panel is needed.

Try replacing the probe.

try here for parts and the 800# for confirm and tech support for the repairs needed. https://www.repairclinic.com/Shop-For-Parts/-x6b677373393037/Kgss907-Parts Best to you

you don't have a regular igniter in this stove you have stick igniters it sounds like you have a bad spark module part WPW10331686 all the igniters are plugged into it,the spark module is up in the top console on the left side or on the back wall but it's easier if you pull out the stove to get behind it,make sure you unplug the stove before you work on it,go here to see picture of module https://www.repairclinic.com/PartDetail/Control-Module/WPW10331686/1937904 also you can go here to sears site,put your model number in and see all parts,go to control panel to see spark module https://www.searspartsdirect.com/model-number/KGRS807SSS00/0593/0124002.html?searchType=modelSearch&q=KGRS807SSS00&searchTerm=KGRS807SSS00

Hello, I would suggest, that when a new bulb does not work either, there is a problem with the wire connection to the bulbholder. As far as I know, there is no fuse in the cooker. The bulbs and the bulbholder become very hot in use and i often see alsmost melted connections. Then there becomes oxidation in the connection and that blocks the circuit. A second possibility is what you can see on the picture in the link. It is the second picture, Light socket brass tab. Sometimes it becomes so hot that it removes from the connection with the bulb. You can pull it back a little and try again. BE VERY CAREFULLY AND DISCONNECT THE COOKER BEFORE DOING THIS Light Bulbs Keep Burning Out In Same Light Fixture

You would need a new control board for this fault code but its very very expensive. It would be advisable to invest the repair money into a new range.