http://www.fixya.com/support/p105869-kitchenaid_300_watts_ksm90_ultra_powerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 03 Dec 2009 05:05:12 GMT80http://www.fixya.com/support/t3339452-almost_12_year_old_mixer_inI have an almost 12 year old mixer, and in the last year it seems the head (for lack of a more technical term), is a little lower so that the paddle attachment grinds on the bottom of the bowl. The coating of my paddle attachment has come off at the...Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3429619-when_moving_mixer_placed_its_sideWHEN MOVING, THE MIXER WAS PLACED ON ITS SIDE FOR A PERIOD OF TIME, CAUSING OIL TO LEAK OUT INTO THE PACKING BOX. NOW IT GETS HOT AND SHUTS DOWN. HELPThu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3246197-took_out_side_bolts_removed_top_nowI took out the side bolts and removed the top, now have no power to unit. did I put it back wrong? Problem I needed to address was the paddle was too low and scraping the inside of bowl. Help with both apppreciated. thanksThu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3542923-mixer_oil_leak_th_beatersThe mixer has an oil leak where th beaters connect. I would say an 8th of a cup or more came out. May I still use it safely?Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t266274-kitchenaid_k5ss_300_watt_standing_mixerMy Kitchenaid K5SS 300 watt standing mixer launches into the highest speed regardless of the speed selection. It functions with a sliding knob and I can barely ease it from off to stir and it goes from no power to flinging flour all over the place....Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3514607-bowl_fits_close_mixing_bladethe bowl fits too close to the mixing blade and has scraped some of the surface from the blade. I can not find the bookThu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3506163-oily_substance_leaks_out_underneathAn oily substance leaks out underneath the mixer near where the top section swivels up and down to add attachments. Any suggestions would be greatly appreciated as it leaks down to my countertop or into the mixing bowl if the top section is in the...Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3477479-unit_wont_come_tried_several_powerunit wont come on.. tried several power outlets .. I checked the brushes.. they look fine.Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3457523-speed_selector_fussy_short_occuredSpeed selector is fussy, and a short has occuredThu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3316043-problem_kitchenaid_300_watts_ksm90_ultraProblem for KitchenAid 300 Watts KSM90 Ultra Power Series Stand Mixer Motor will not operateThu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3352370-no_powerno powerThu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3354460-stoped_workingstoped workingThu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3193203-kitchenaid_mixer_will_not_turn_makesThe mixer will not turn it makes a loud noise. What can I do?Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3246308-just_submitted_problemi just submitted my problem: is there a recall or substitution for my leaking ksm90 mixer? i do not want oil in my food or have an eventual burned out motorThu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3288081-kitchen_aid_leaking_oil_slightly_fromMy Kitchen Aid is leaking oil slightly from the bottom. What should I do? How do I add more oil if it needs it?Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3178503-release_wiskhow do you release the wiskThu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3101130-kitchenaid_household_stand_mixer_modelI was mixing pasta dough and mixer began to make a rattle noise - still turns but noise is not right. Also a little grease always dripped in mixing bowl ever since I first bought it new.Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3130024-silver_band_came_off_ksm90_stand_mixerThe silver band came off my KSM90 stand mixer. How do I reattach it.Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t3149671-kitchenaid_ultra_mixer_no_powerI have a kitchenaid mixer KSM90MC model and it was leaking oil. I attempted to take off a few screws to see if I could simply remove the housing to clean it up, and could not... I put the screws back in place, and now the mixer has no power! I did...Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t2933181-kitchenaid_stand_mixer_fell_10_feet_nowmy kitchenaid stand mixer fell 10 feet now nothing happens when plugged in . is it the motor?Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t2973477-banging_clicking_noise_when_moterThere is a banging / clicking noise when mot3r is runningThu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t2706468-ultra_power_kitchenaid_mixer_sI have an Ultra Power Kitchenaid mixer - it's, maybe, 3 - 4 years old. I can't seem to get the attachment off now, however. I have the standard mixing blade on it now, but I can't seem to compress the spring to remove it. Any ideas?Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t2644886-am_having_same_problemMy shaft "thingy" also falls off. What is beyond me is how it was stuck on the in the first place? What holds it up there: It's just the grooved shaft and hole. Was it glued? If I could only understand the principle for how this part is locked in...Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t2642843-kenwood_patissier_400_watts_handle_doughwhat is the min. watts needed for dough mixing? which mixer do you suggest?Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t2483823-when_mixing_something_broke_couldwhen it was mixing, something broke, you could hear the snap inside. Now the beaters do not turn around. We were going to take it in and they asked if was made in CHina?Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t1181474-need_peelDo I need to peel and core my apples before putting them through my fruit and vegetable strainer when making applesauce?Thu, 03 Dec 2009 05:05:12 GMThttp://www.fixya.com/support/t1304117-no_problemJust purchase a KitchenAid Stand Mixer from Wal*Mart K5SSWH, 300 Watts, I\is it suppose to be a good mixer?Thu, 03 Dec 2009 05:05:12 GMT