20 Most Recent Krups GVX2-12 Electric Burr Grinder - Page 6 Questions & Answers


Google (krups)(xp1020)(manual) without parens.

Krups Coffee... | Answered on Aug 23, 2018


Krups Optisteam Food Steamer with manual was for sale on ebay with a manual, but is no longer available.

https://www.ebay.com.sg/itm/Krups-Food-Steamer-Optisteam-649-With-Manuals/123088622624

Krups Coffee... | Answered on Aug 11, 2018


Error code 01 accompanied by that noise points at the distributor being faulty. The distributor is the electronic tap that directs water to the ram to compress the grounds in the boiler and then redirects it to the brewing chamber to make the coffee, then to steam, then to rinse. It's the sort of item you just replace because it's quite a large job to change it anyway, not the sort of repair you want to be doing over and over trying not to spend money on the part.

Krups Coffee... | Answered on Aug 02, 2018


You need to contact the service agent.

Krups Coffee... | Answered on Aug 01, 2018


OA means that the sensor is not detecting any heat in the boiler. That means either the boiler is not heating or the sensor or sensor wire is detached from the boiler or the sensor has failed. The sensor is located behind the front display panel stuck in the front of the boiler and it has 2 thin wires in it with push on terminals.

Krups Coffee... | Answered on Jul 31, 2018


The valve in the lid is faulty, it will eventually fail completely. The correct lid can be ordered from your local Krups service agent. Be prepared for disappointment though as many of them are now obsolete. You will need to give the agent the model number, it's normally on a sticker on under the base.

Krups Coffee... | Answered on Jul 04, 2018


never knew they sucked it up

Krups Coffee... | Answered on Jul 01, 2018


Contact Krups directly and request the service repair manual for model 229.

Krups Coffee... | Answered on Jun 17, 2018


O sensor de temperatura na parte frontal da carca?a da caldeira (atr?s do painel frontal) n?o est? detectando nenhum calor na caldeira. Freq?entemente ? o borne de terminal desconectado do sensor ou o sensor inteiro n?o est? mais preso na caldeira. A solu??o da Krups ? para substituir a caldeira completa, mas no passado, eu revendi o terminal de volta ou colei (com cola resistente ao calor) o sensor de volta para a caldeira.

Krups Coffee... | Answered on Jun 11, 2018


A common place for a leak under the machine is the barista seal that goes in the bottom of the boiler around that eject rod. Barista seal part number is MS5002202, Seals on the tamping piston are MS5002040 (there can be 1 or 2 of these piston seals) If fixing the leaks does not fix error 6 then I expect it will end up being the distributor. Part number MS2A01500

Krups Coffee... | Answered on May 30, 2018


Did you completely finish the descale process. On the models I'm familiar with you run thru the descale doing every step it requests then refill the tank and run thru the rinsing process until it ends completely. As far as I know there is no reset for errors, the problem needs to be located and fixed. I have no idea what the unplug icon may be indicating.

Krups Coffee... | Answered on May 16, 2018

Not finding what you are looking for?
Krups GVX2-12 Electric Burr Grinder Logo

37 questions posted

Ask a Question

Usually answered in minutes!

Top Krups Coffee Makers & Espresso Machines Experts

Pierre Laplante

Level 3 Expert

2042 Answers

Ray Murphy

Level 2 Expert

68 Answers

Marvin
Marvin

Level 3 Expert

85104 Answers

Are you a Krups Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Krups Coffee Makers & Espresso...

  • Krups Coffee Makers & Espresso...

Most Popular Question

machine starts but wont continue run

  • Coffee Makers & Espresso Machines
Loading...