20 Most Recent Makita Bo4550 Finishing Sander Sanders - Page 5 Questions & Answers

If this is a belt sander then they have a tracking adjustment knob. You will need to adjust it so that the belt stays on and doesn't want to walk off.

The laser diode is not coming on for some reason. Sounds like the diode might have failed. You will have to take it into a mikita service center or send it in.

looked at breakdown for the 9035 and this shows as a half sheet sander with 2 clips, they have a lever that has to be pulled away from the sander to allow you to lift up on the clamp and insert the paper under the clamp jaws when finished inserting the paper just push the levers back to their original position. You can download an owners manual by going to makitausa.com and typing in your model number. Let me know if you need more assistance.

find your model number and go to "makitause.com" and you can download the operators manual with detailed instructions for this repair. REMEMBER to unplug tool before starting. If you give me the model number I will help but they had 2 different types of holders on the planers so I can't begin to help. Let me know.

Hi,
There is a screw that changes the angle of the roller to change the tracking of the belt... this is very sensitive and probably if you are having trouble is more a reflection of the belt quality then the sander...try different belts before you toss the sander... I have had one for years and love it... although the belt tracking is tricky sometimes anss your have to keep after it...
The adjust ment is very touchy only turn it maybe 1/8 turn at a time...

heatman101

without knowing what the model number is you also have to remove the pad assembly and usually you will find some there if all removed you can GENTLY pry the cover halves apart. Go to Makitatools.com with you model number and you can download a breakdown for this tool.

You may have cuttings building up in the slide, throwing it out of alignment and causing offset tension.....

go to Makitatools.com and type in your model number for a parts explosion. Did you remove all the screws and the pad and bearing. let me know if you still need more assistance.

how can i remove hair from my body?

I can't find anything in their catalog BUT they do have a website for nearest service centers go to Makitatools.com and try that or you might try a toll free number at 1-800-625482. Good luck

first go to Makitatools.com and type in your model number and download a breakdown for the tool. The collet body and nut have to come off before the armature can be removed. After viewing the breakdown you will see that it is not really that hard. let me know if you need more assistance.

go to Makitatools.com and type in your model number and you can download a breakdown for the tool. I have had to cut the cord before and take out in pieces.