20 Most Recent
Whirlpool Hydrosystems 72 X 36 Biscuit Tub Bathtub Questions & Answers
There are many, many plugs
its the problem of any of the internal wire not getting connected properly.the connection is getting loose in between.its not a power problem its the connecting wire problem under the unit.the connecting wires are getting cut in between so the current circuit is not getting completed.you will have to remove the unit and check the passing wires under the unit.you will see either a burnt wire or cut in the wire in between you will have to check and replace the particular wire by connecting the external wire carefully,'
if not familiar then local electronics repair technician familiar with this is advisable its not a tough job but time consuming and technical job.
This will
help. Thanks please keep
updated.please do rate the solution positively .thank you for using fixya
1/6/2010 3:07:42 PM •
Whirlpool...
•
Answered
on Jan 06, 2010
How to clean jet on whirlpool tub
first of all you need to be draining the tub completely and removing any bath mats or items from inside. Fill the tub with hot water, ensuring that the jets are covered. You can use white vinegar, 2-3 cups of white vinegar directly to the water in the tub. Turn on the whirlpool system and run it for 15-20 minutes. While the jets are running, use a soft-bristled brush to scrub the jet openings and the interior walls of the tub. Drain the Tub: Refill the tub with clean water and run the jets again for another 10-15 minutes to rinse out any remaining cleaning solution. This should help. This is what I did with mine
Galbocca tub with jets
You have some bacteria build up on the inside of your tubing of the tub.Try some cleaning solutions per directions on the bottle of tub cleaner made specifically for this situation.
Cleaning Solutions US Parts Center
Galbocca bathtub with jets
I have galbocca jet tub which is no longer working. I live in Lawton, ok. No one works on them here. Any suggestions?
Not finding what you are looking for?