FixYa.com
Technical Support, Instructions & Repair Service

Back to: All Products > VAX Appliances > 2000 Canister Vacuum

Troubleshooting VAX Appliances 2000 Canister Vacuum, Support & Service

Post a new problem    View unsolved problems

Solved Problems

How to open the motor housing.
NOT A QUESTION, BUT AN ANSA............................ Anyone interested in stripping down the motor area of a Vax...

Removing obstruction from vacuum motor
Hello, I would appreciate advice on how to take apart my vacuum cleaner to remove a bolt that I believe is stuck in the...

TriStar Vacuum Nozzle Pivot Elbow...
I would like to know if someone could tell me how to replace this part. I have the new part but am clueless as to how it...

vax 6151sx water inlet tube
Tube has become disconnected from machine. Can it be fixed at home? How do you remove the housing to do it?

Vacuum cleaner smells
Eureka canister starts to smell as soon as it is turned on.  My panasonic starts to smell after about five...

brush does not turn when vac touches floor
Our Eureka vacuum doesn't seem to be working properly. The brush does not turn unless you are pushing the vac. It...

Instruction manual for Eureka 409B
It's not picking up good. I cleaned all areas and still not picking up. I have no manual because it was given to me. The...

aqua vac vacuum cleaner
hi there i got a vacuum cleaner given but never used this type before. It's a Aqua Vac (Type 6319P). it's extremly noisy...

Vax problem
I have a Vax Rapide V0255 that will not wash the carpet. I have cleaned all the tanks etc but when i hold the trigger...

hoover steam vac dual model F7425900
I have a hoover steam cleaner that the wheel do not rotate

Dirt Devil Repair
Where can I find an exploded parts diagram for my Dirt Devil Reaction Dual Cyclonic (model # M110000)?

craftsman vacuum
I need to see a manual to get parts for craftsman vacuum model 11317060. Serial number 00259v2279

Need Help with the Kirby
How do I hook up the parts to shampoo the carpets with the hose parts?

how do I remove a
how do I remove a motor from a Dyson DC04? The bottom plastic cover can be removed by unsrewing the tork screws but the...


[1] 2 3 4 5 6 7 8 9     Next

Sponsored Links

Repair Service
Find Vacuum Repairman Near You:

FixYa does not evaluate or guarantee the accuracy of any information provided through its proposed solutions, posts, or Expert Assistance Sessions. By entering this site you declare you read and agreed to its Terms. You may NOT copy or distribute the content that appears on this site without written permission from FixYa Inc.
© 2005-2008, FixYa, Inc. or its affiliates