Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician
Roku Communityhttps://community.roku.com > Remotes > td-p
Aug 28, 2020 - Solved: So I just purchased a voice remote to allow one remote for a Dynex TV in the office. I have cycled through so many brands without ...
7 answers · Top answer: All the line of sight was good. It's just that so many companies rebrand TVs that electronics ...
Hi,
Please disconnect and then reconnect the 2 devices before moving forward. But you can wait 45 seconds before re-connecting the devices. If that does not work, please reference the manual for your contour box. Thank you.
Pull the mains plug and count to exactly 50 and plug it back in. This is a sort of a reset.
All televisions need a remote. Just buy a new one. Buy it for the specific model. Nobody buys universal remotes any more.
https://www.google.com/search?q=replacement+remote+control+for+dynex+tv
..
Question edited for maker and (what it is).
Question moved from Computers category.
Try are Factory Reset to set the picture settings to default. If that doesn't fix it, you will need a repairer or a new one. They are a 'cheap' brand.
https://www.google.com/search?q=dynamite+dx-l42-10a+reset+picture+settings
..
As the blue light is ON, the power section board is functioning almost right. The fault be in its main board. It will be best to contact any service technician in this case. If you wish to get some details; check the sites linked here.
https://elektrotricks.blogspot.com/https://electronicshelponline.blogspot.com/
Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault. Search the site by type in the Brand Name of your set, in its search bar at the right side column, and press enter. See it in by Webview with mobile or by desktop. Mobile View has no search box. Screen-shots to defective LCD panels are given. You can see and compare to that to your TVs', and can make sure about the fault to an extent.