20 Most Recent Ge Medical Systems Ge Marquette Mac 1200 Interpretive Ecg Questions & Answers


This may be of interest.

http://www.silexamerica.com/uploads/common/GE-case-study.pdf ho

Clearly, you much be technical support within the medical corporation. It would seem reasonable to contact the manufacturer with your particular concerns. Google searches probably will retrieve insufficient technical information even if you narrow the search to "ecg corruption."

https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=4&cad=rja&uact=8&

Ge Medical... | Answered on Feb 05, 2018


Hi,
Sorry I haven't any idea on your query, But have a sollution that if you want any kind of medical cable then Peterstechnology is a best option for you. It is providing best medical cable with an affordable price.
Custom Medical Cable Assemblies Manufacturer

Ge Medical... | Answered on Jul 21, 2016


I'm sure he has took standard repair procedures of eliminating "OPERATOR ERROR'. Now to get technical. In a hospital setting the fastest repair to a medical device is the 'Board Walk'. Use a working unit and CAREFULLY ( power unit down, GND yourself to both units, disconnect AC power, ect.) swap modules between units to isolate malfunction. In the old days we would check for possible bad component on the module. This can apply to the mechanic modules as well. I advise to look into Mgrs. for jobs.

Ge Medical... | Answered on Jun 10, 2015


HI,
Here is the manual for MAC 1200, Check the page number 42 to 44. You will find Queue setting.
MAC 1200

Ajin

Ge Medical... | Answered on May 14, 2015


Does it keep losing the date when you turn it off? or are you asking how to set the time and date?

If you're losing time and date when you turn the unit off, there's a coin cell battery on the main processor board that needs replacing.

If you just want to set the time and date - Press "SHIFT" and 12 lead keys at the same time. select "7" for date and time, use the return key to select date or time

Ge Medical... | Answered on Mar 25, 2014


Check your RL (green) lead or trunk cable.

Right leg is the ground so (if it's bad) you won't get a QRS complex.

Ge Medical... | Answered on Mar 25, 2014


Hi...
i would be appreciate those who sends me MAX 1 stress test (workstation) service manual..... i tried a lot to find it but could not make it... do help me. thank you.

Ge Medical... | Answered on Jan 22, 2014


replace the backup battery usually found on the back or near the bottom near a clip.

Ge Medical... | Answered on Dec 03, 2013


go see doctor if you are concerned or ask for something for runny nose at pharmacy

Ge Medical... | Answered on Nov 13, 2013


go to pharmacy and ask for something for runny nose

Ge Medical... | Answered on Nov 13, 2013


The password should be "system." Contact Discount Cardiology for the clips, ekg paper, and whatever other accessories you may need.

Ge Medical... | Answered on Jun 08, 2013


I would reset the machine to factory defaults. Leads to be printed can be manipulated but the factory setting is to print a full 12 lead.

settings-> system setup-> restore defaults-> yes -> hit start until you are back at the main screen and hit print again ( to get a print out)

If it still wont print all 12 leads call us: Discount Cardiology 800-507-8244

Ge Medical... | Answered on Jun 08, 2013


hi,
i have its operation manual in pdf format if you need the same will sent to you. for that i need your email id . because its a large file cant set through this sight.
ok

Ge Medical... | Answered on Mar 21, 2013


http://www.frankshospitalworkshop.com/equipment/documents/ecg/service_manuals/Marquette_MAC_5000_-_Service_Manual.pdf


Page "2-7" talks about paper installation.

Ge Medical... | Answered on Feb 24, 2013


Hi,

- Go to the storage program by pressing "Shift" + "Store/retrieve" simultaneously.
- using the down arrow, move the cursor to the space where your ECG's are listed and underline the ECG you wish to re-print.
- Once the ECG is underlined, press "Shift" + "down arrow" simultaneously. Two little cursors will state that the ECG is selected.
- Press "Enter". The cursor will come back on top of the screen, on "Print".
- Press "Enter" again. The machine will start to print.

I hope this helps !

Fel

Ge Medical... | Answered on Jan 06, 2013


First thing is first.

Hook your ekg machine up to simulator. Run an ekg using the simulator as a patient's heart. If you get a clean 12 lead printout with the interpretation reading "normal sinus rhythm" then I doubt that you need a calibration. If you get something else, I will need to know what it is that you got. there is no true "calibration." If there are issues, they are addressed. Otherwise, you are good to go. Keep me posted,

Discount Cardiology- The ekg machine experts

Ge Medical... | Answered on Oct 08, 2012


Hi,
If you can provide your email id the i will sent you the service manual for MAC 1200.
Ajin

Ge Medical... | Answered on Jun 10, 2012


Hi,
Its recommended that you should take the ECG on battery backup. Because if you use power line while taking the ECG there is a possibility of interference on the base line. Try to replace the battery before taking ECGs.
OK

Ge Medical... | Answered on Feb 16, 2012

Not finding what you are looking for?
Ge Medical Systems Ge Marquette Mac 1200 Interpretive Ecg Logo

Popular Tags

114 questions posted

Ask a Question

Usually answered in minutes!

Top Ge Medical Systems Medical Experts

Fred Murdock
Fred Murdock

Level 2 Expert

83 Answers

ka4iup
ka4iup

Level 3 Expert

3960 Answers

Vuk B

Level 3 Expert

683 Answers

Are you a Ge Medical Systems Medical Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ge Medical Systems Medical

  • Ge Medical Systems Medical

Most Popular Question

need user manual burdick ekg e 350

  • Medical
Loading...