http://www.fixya.com/support/p1006103-tasco_target_varmint_6_24x42mm_rifle_scoSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comFri, 19 Mar 2010 06:27:00 GMT80http://www.fixya.com/support/t4129786-cross_hairs_turn_when_adjusting_powercross hairs turn when adjusting powerFri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t3868378-rifle_scope_50_foot_paralex_needed_wI shoot rimfire benchrest indoors @ 50' and outdoor @100yds. Fixed power is my first choice but variable will do.Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t2682762-point_impact_changes_every_shotUsing a Tasco 3-9 x 40 scope on an 8 x 57 Mauser, the shots don't land anywhere near the target and never in the same place - that is not within a foot radius at only 25 yards. I installed better mounts, but that didn't help at all. Scope has hardly...Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t3387171-determine_tasco_6x24x42_scope_madecant determine if my tasco 6x24x42 scope was made before 9/02. rifle was dropped and can not get it sighted in. is there a fee to get it repaired!! I some other name brand riflescopes have lifetime warranties!Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t2632440-tasco_6x24x42_cosistancey_issues_afieldA side from the fact that this was a birthday present and as a scope goes Tasco isn't worht the swet of my balls I have a sixty year old 222 rem. I use for ground hogs on the farm. Now, the yardage is the same 110 yrds. with and old redfield i can...Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t1862216-when_zoom_scope_impact_pointwhen you zoom your scope does the impact point change on the target? is that when you use mil dot?Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t2461784-will_scope_remain_zeroed_differentHello, If I zero my scope on my .17hmr at 50yds and it shoots dead centre will I still aim for the same place at 100yds and 150yds? Or do I need to aim higher/lower etc? Thanks, AlexFri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t1862551-seting_scopewhat distance should you set a air rifle scope, and what is the best way to set it? i asked earlyer about impact point changing with zoom.was told it didnt. so if set on center at 75 ft. will it hit center when i use the zoom ? thank you for your...Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t1804102-tasco_6_24x42mm_rifle_scope_parallaxgot new scope want to know how it works example 300 yds where do i aim dead on? with 22 250 45 gr do i hold dead on when it is on the 300 mark on parallax adjustment help me understand mixed upFri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t1573764-scope_ruger_10_22_carbinei have never had a scope before. what scope would you recommend for this rifle. some suggested a bushnell banner 3x9x40. just want to use for target shooting. i do not want anything real expensive. any help would be appreciated. also would like a...Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t1896214-hammer_scope_looses_focusI have a Panther 8x32x56, and the end objective O-ring that seals the tube and holds the lens in place has come out. Can someone tell me how to contact the manufacturer?Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t2031529-swiss_arms_4_x_40_reticle_brokeni own a swiss arms 4 x 40 scope ive only had it for about a month and th orher day i noticed the horizontal crosshair line has saperated for the others and i thought i could still shoot it with three lines so when i shot it the others separatedFri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t2696904-unable_zero_in_target3-9x50 full size range scope/20 is what my husband ordered and rec'd yesterday; unable to zero it in, tried adjusting elev. and windage spent over 100 pellets. couldn't get it zeroed in; he has a Gamo Black Cat 1200 which had trouble w/scope also. it...Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t2737959-bushnell_banner_elevation_maxed_outbushnell banner 3-9x40 elevation will not adjust and is maxed out and will not go on targetFri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t2847329-crosshairs_turned_anti_clockwisecrosshairs have turned anti clockwiseFri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t3232124-4_x_12_redfield_s_cope_at25yards_4I have a 4 X 12 redfield s cope at25yards on 4 power its two inchs left of the bull on 12 power at 100yds its not on paper?Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t3426144-pine_ridge_scope_moisture_insideI have a Pine Ridge scope with moisture inside. Is there any way I can take it apart to clean it, or will I have to buy another one.Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t3431979-brand_new_simmons_aetec_2_8_10_powerI have a brand new SIMMONS AETEC 2.8-10 power. The power adjustment dial is extremely stiff. What could be the problem?Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t3463014-remove_bolt_from_mossburg_308how do i remove the bolt from the mossburg 308 win. and is there a product you offer to modify the trigerFri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t3475709-clean_springfield_model_67e_20_gaHow do i clean a springfield model 67e 20 ga shotgun? I do not see an easy method of removing the triger mechanism.Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t3536039-get_manual_springfield_jwhere can I get a manual for a springfield j. stevens arms company model 87A rifle?Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t3603339-scope_rifle_foggy_insideMy scope on my rifle is foggy on the insideFri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t3603789-redfield_lo_pro_rifle_scope_3x9I have a Redfield 'LO-PRO' rifle scope, 3X9 variable, on my 300 Win Mag. It is about 20 to 25 years old and the cross hairs must be loose. They are not straight up and down anymore. Will this affect the accuracy of my rifle eventually? It seems to...Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t3817234-run_out_elevation_when_mounting_scopeI run out of elevation when mounting a scope to my Mini 14. What can I do? I cannot bore site the scope because the elevation maxes out. I use a Leupold boresite device. At the range the gun shoots low, but I am out of elevation and cannot get the...Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t3883464-mil_dot_dots_not_agreethe mil dot - dots do not agree with what they should be according to the detailed info that BSA sent me , nor does it agree with what i have read on the internet about mil-dot ranging.Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t4019689-did_any_winchester_model_75s_comedid any of the winchester model 75s come with a factory peep sight. the one i have is missing a pin of some sort that locks the sight onto the rifle. i took it to a gun shop and the guy wasnt sure if it was possiably a factory sight or a lyman.Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t4076544-built_first_sks_yugo_will_notI HAVE BUILT MY FIRST SKS (YUGO) AND IT WILL NOT SHOOT IN SEMI-AUTO I HAVE USED A NE GAS VALVE NEW GAS PISTON NEW GAS TUBE AND OPP ROD AND SPRINGFri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t4185074-winchester_model_88_trigger_assemblywinchester model 88. with the trigger assembly installed and the hammer installed and without the hammer spring guide rod, spring, guide, installed. I am working with a seperate unit-out of the receiver. Where the trigger rests on the hammer and...Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t1760649-using_red_dot_scope_mossburg_turkey_gunI'm using a red dot scope on a mossburg turkey gun with a choke. I'm using the 3'' heavy tungston loads for longer distance shots. What distance should i zero in the scope at? 20 yards? 30 yards? 40 yards? /Fri, 19 Mar 2010 06:27:00 GMThttp://www.fixya.com/support/t1881749-center_post_use_thanksthe cross hairs work great, i just don't understand the purpose of the post. thanksFri, 19 Mar 2010 06:27:00 GMT