we have nokia ip530 system in that hdd is crashed if i put new hdd where i get software
please give...
(More)
we have nokia ip530 system in that hdd is crashed if i put new hdd where i get software
please give me suggestion
Thank you
i locked my phone with a diff security code.i have forgotten that now.and if i change the sim it...
(More)
i locked my phone with a diff security code.i have forgotten that now.and if i change the sim it asks for the code.i hav imei and master code bt cant unlock tat.pls help.
Hi, My IP380 is installed with Checkpoint firewall software. The equipment is installed in a LAN...
(More)
Hi, My IP380 is installed with Checkpoint firewall software. The equipment is installed in a LAN environment, separating the client sector and the server. Problem: At times, client login to the network will fail and so far the only resolution found was to bypass or reload the image. However, when comes to IP350 or IP390, we don't face such problem. Need assistance..
Hello, Let me briefly tell the details of problem. Recently I changed the IP address ( EXT) provided...
(More)
Hello, Let me briefly tell the details of problem. Recently I changed the IP address ( EXT) provided by our ISP on ext interface of the Nokia appliance. I followed below steps. Login to the Dashboard via your Internal IP address 2. Define external IP address for the Firewall object. 3. Login to appliance via voyager (Internal IP)change the external IP address. 4. Change the default routes. 5. Login to dashboard and get click the button get "Interfaces with topology" or you can manually change the IP address. 6. Push the policy. After this I see that Internet access is withdrawn and no access to internet and other firewall located at USA. I restored the old IP address in Nokia and Check point also and power off and powered on (thorugh power button) and I got access to Internet and VPN all apllications started running, but problem occured with dashborad connectivity with smart server, we have NOkia IP 260 with Check point R55. We have done basic truoubleshootng with Nokia applicance and loged call with Nokia TAC. The error message is " connection can't be initiated, please make sure the server is up and running and that you are defined as GUI client". As R55 is outof support hence Check pint TAC is not able to provide solution. I tried running cpconfig and cpstart command in hyperterminal of Nokia but it says command not found, I am very perplexed and not sure what is wrong can any one advise ,what is over looked or what is the solution of this proble, I shall be highly grateful on your support. sincere regards, Manoj Network Admin