http://www.fixya.com/support/nec/multimedia_projectorsSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSun, 27 Jul 2008 10:06:35 GMT80http://www.fixya.com/support/t103199-whatever_button_press_status_lightEven when the projector is switched off i can't use the buttons to switch it on. Every button makes the status (yellow) light switch on. Any ideas will be very appreciated.Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t40687-problem_in_connecting_pc_lcd_projectorI am an IT teacher of a school. Our school has several NEC MT1040 and MT1050 LCD rojectors. Recently, a company installed all the projectors to the ceiling for us. However, I found all the MT1040 projectors give only display of 800x600. They...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t40789-nec_problem_still_persistsI have an NEC Versa 500D, 486DX 75 24MB Ram, running win95 however i cannot access some icons in the control panel, and i cannot get into display properties or in to dial-up networking to create a modem connection. I have just...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t190014-nec_vt47_lamp_lightThis unit has worked fine for several years. Now when I turn it on, at first the green power light goes on, after a few minutes there is a beeping sound and the status light blinks red. The lamp does not go on. Could this been as simple as needing...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t505809-soundWhen a DVD is played through it, it is not loud enough. The volume is turned all the way up to 63, but it is not loud enough for the class to hear. Any suggestions?Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t473963-lamp_not_lightingProjector gets power, when first turned on power & status light are green. Then to goes into stand by mode power goes to blinking orange, status goes blinking red ( fast blinking) & it shuts off. this is an NEC VT 660 about 3 yrs old. the lamp has...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t473364-nec_lt170_diplays_annoying_lineOur NEC LT170 displays a line down the center of the screen. Anyone know how to fix this?Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t450687-nec_lt30_lamp_dosent_turnWhen i turn on my NEC LT30, it trys to start op, but after 30 sec. it goes to standby mode and the status indicator is blinking red. According to the troubleshooting in the manual, the problem is: "Lamp Error" "Lamp fails to light. Wait a full minute...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t414466-bright_yellowWhole screen took on bright yellow shade as if projector bulb was yellow, how do I get back to normalSun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t383716-fan_errorHi, I have just been reading the manual regarding a Fan error I have. When I turn the projector on it automatically turns it's self off after about 1min and then I get the Status light blinking red every 8 seconds and the Power light on a constant...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t379191-svideo_component_video_inputsneither the s video or component video inputs are working on my NEC VT575 projector. Is there a menu setting I need to change? What else could be causing it? Both computer inputs are workingSun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t304344-nec_lt260_projector_noiseMy LT260 was on as usual last night and all of a sudden it started making a terrible noise. It sounds like something making contact with a cooling fan inside the unit. Anyone experience this or can advise me on how to open the projector up and...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t254499-dvi_digital_out_rangeI have a NEC HT 1100 projector. It was working fine now I have no picture, it says DVI Digital out of range. I have no idea what this means. Can anyone help pleaseSun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t252559-nec_model_vt48_need_clean_filterHi, We have the above projector in our primary school. Unfortunately, the person who installed it a year or so ago did not leave us a manual. When we switch it on now it has a sign saying "Please Clean Filter". It tells you on the bottom to clean the...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t238733-ghostingThe image on the screen seems to have a ghost. i.e. any words have a faint image off to the left. I've tried to Clock and Phase manually but the image still is ghosting. I even hit default and because the projector is ceiling mounted everything was...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t232077-multisync_mt840_in_work_shopthis Projector always looks out of focus the lamp life has 1700hr leftSun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t230869-status_light_blinking_redThe status light is blinking red every .5 second at .5 second intervals for 6 cycles. The power light is solid orange. Per NEC manual, it says to wait a minute and restart. It just continues the same error condition. I replaced the lamp, same problem...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t209779-projected_screenWhen I turn on the projector, the projected computer screen is only about half the size. What is the problem? What must I do?Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t181532-changing_lampHow do I change a lamp on an NEC projector MT 1075?Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t162116-status_indicator_blinks_red_notOn power-on, the usual start-up delay, the the Status indicator blinks RED, and the Power indicator stays ORANGE; and Projector does not start!Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t157695-nec_vt670_blown_fuseI have a NEC VT-670 and has a slow blown fuse burnt. I replaced 2 times, but still blowing the fuses even while I checked the cables to see if a hot wire was grounding, but found nothing. Any suggestions, tips ??? Thanks in...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t103370-nec_lt_240k_projectorHi! I hope that you will help me with the problem I have with this certain projector (NEC LT 240K). The problem is in the part where the lens is (with cameras it's called diaphragm, but i?m not sure if it's the same name for this particular part...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t122025-random_dots_no_picturemy ht410 was fine and shut down as usual, on start up the next evening the unit lights showed normal initialization organge light to flashing green to solid green....light is eminating from inside the unit but all it displays is small random dots...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t133962-flashing_red_status_light_nec_vt45There is a flashing red light on our school's VT45 projector. The lamp has been replaced but the flashing red light remains. Any suggestions to try?Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t40732-projector_help_requiredHi all, ? I need some help with a projector problem. ?The problem is that when using a s-video cable, there are lines appearing in the image. ?When using composite there are no such lines. This problem only occurs when using a long...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t40784-annihilator_pro_problems_help? ? I just bought an Annihilator Pro GeForce card and have been having major problems with it. ?When I installed all text and Windows are huge on my NEC Multysync 70 17inch screen. ?Everything is so big I can't see the right, left, top, and...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t31516-nec_vt_540Hi! I just bought a NEC VT-540 LCD projector and I have a few problems with it. I can get a generally stunning image from 16:9 enhanced DVDs (such as A Bugs Life) when I connect both the S-VHS and VIDEO (RCA) plugs to the projector, ...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t31536-nec_lt80_issue_any_adviceI have a NEC LT80 that is being 'fussy' on me. ?Sometimes I turn it on and it buzzes then turns off, and the status light flashes, indicating the temp protection has been triggered, even though the system is at room tempature. I've had this...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t117586-mt830_color_convergence_blue_left_yellowMT830 suddenly developed vertical color alignment issues. Yellow is trimming everything on their right edge and Blue is trimming everything on the left edge. This is only affecting the vertical edging of objects. The horizontal edges of objects...Sun, 27 Jul 2008 10:06:35 GMThttp://www.fixya.com/support/t198644-mirror_imageEverything on the screen is coming up as a mirror imageSun, 27 Jul 2008 10:06:35 GMT