http://www.fixya.com/support/nec/motherboardsSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comMon, 07 Jul 2008 07:47:58 GMT80http://www.fixya.com/support/t247279-packard_bell_easynotewhen swiching on mains light is lit hd light has a quick flicker on then of and fan starts to run and stays running but nothing else happens. Regards MartinMon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t206542-no_displaywhenever i start the system, it display nothing on the screen, i changed the process, the VGA card, and the Memory, still, it is not displaying anything.Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t138864-projector_problemsI am trying to use an NEC VT 676 projector. My full image from my monitor is not projecting. I must use a the scroll to move around the monitor to show the different aspects of the image after projectionMon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t103962-usb_connectors_plroblemI've tried to connect the front panel USB(new case) but I always receive the message the device is not recognized, I couldn't find the pin's diagram on the NET, can you tell me where should I find it? thanks.Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t45329-nec_laptop_problemSweetsI am trying to figure out what is wrong with a friends laptop. ?It is a NEC laptop pentium 90mhz, it has the You remove the floppy drive and install CD in front below keyboard. System works really great...Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t172137-problem_nec_3500_ag_oemHi, I installed a NEC 3500 AG (OEM) DVD-RW burner on a computer with Pentium 4 (2 ghz)and 500 MgB RAM. WIN XP recognized it right away during install. I am using Nero 6 to burn DVD and CD-R media. However, something is not working right....Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t172134-nec_9616_upgradeLooked on your web page and it says a overdrive processor is not available for the NEC ready 9616 120mhz. It states that I need socket 7 Igot a socket 5...whats the difference? Looking around the site I find a note for "unlisted" manufactures"...Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t172126-fire_alarmI am doing an install in an old commercial site. It currently has a combo panel that I am going to be expanding out. My problem is this: The fire alarm portion of the existing system, by no means of the imagination, meets current NFPA 72 or...Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t172122-pc_wont_postHi all, Following a move, my old PII 266 server doesnt want to come back to life. Pressing the power button sees about 1 second of activity, then it switches itself back off again. Requires 30 seconds, or the mains cutting / restoring before...Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t45287-millennium_powerdesk_3_41_problemIs anyone else having problems with 3.41? Sometimes when I am booting up into Win95, right when the wallpaper should appear, it crashes and reboots. My setup includes: NEC P166 w 32 megs ram Millennium 4wram w bios 2.5 PD 3.41 Rightous...Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t45254-bx_2_motherboard_biosI have an NEC PC w/ an Intel bx-2 Motherboard. ? The Bios # 4S4EB2X0.11A.0005.P04 Can I upgrade the bios W/ the latest version from the intel Site? ThanksMon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t45137-motherboard_problem_please_helpIs there any way to reset the settings that your motherboard manufacturer set it to. I've tried hitting the reset to defaults on the bios screen but I'm still getting a "drive A error " but there is nothing in drive A, I have my floppy drive...Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t45117-nec_versa_4000d? I bought a used NEC Versa 4000D laptop with phoenix bios 4.0.7, problem is, I didn't set the password to enter setup, I am unable to contact the previous owner, is there anyway to get around this?Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t45103-6x86_p166_133mhz_166mhz_asus_boardI've recently overclocked my 6x86 rev 3.7 p166+ to 150mhz P200+(2*75mhz) on the ASUS p55t2p4 mobo. ?It works great! ?My question is has anyone had luck with stability at 166mhz(2*83)? Thanks Mike WheatonMon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t293280-problem_in_install_winxpi installed winxp but it not boot, so i change the os? win98? it will working, from that to upgrate to winxp, the same problem is occur, so kindly give me solution for thatMon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t264193-nec_p8100_compatible_motherboardI cannot find the specs of the nec 8100 anywere can anyone help me findout what the motherboard is and other compatible motherboards? ThanksMon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t206173-laptopa friend downloaded spybot on2 my laptop which is currently not connected 2 the net,after he completed the download i clicked on2 it and it did nothing and it is now flashing orange down the bottom of my screen but does nothing!how do i get rid of...Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t181694-boot_up_problem_versa_p600When I start up the system it tries to networkboot (4th in the boot up sequence). Using F2 for system utilities shows that the system doesn't think that it has a Primary master drive. Persevering with multiple starts, the system then boots up and...Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t172129-se440bx_2_coppermineI have a NEC computer that I bought equiped with a SE440BX-2 motherboard and a PIII-500 CPU one year ago (in July). About two monthes ago I decided to upgrade it with a PIII-800E processor. It was working perfectly until I updated the BIOS two days...Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t45291-nec_dot_matrix_printer_problemhi i got an nec printer dotmatric that works fine on my nec 486 pc but with the same driver and all other different drivers refuse to work in my amd 350 system have reinstalled the win98 operating system(without formating) but same...Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t132474-need_help_nec_galileo_845gl_motherboardcould someone send me dhe drivers from this motherboard. i installed windows on my computer, but i lost the drivers cd. if you have,it please send it to: dj_vlad2222@yahoo.comMon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t144255-need_driver_motherboardNEC Galileo 845GL (N4IBFGL) MotherboardMon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t148878-please_give_good_solutioncould someone send me dhe drivers from this motherboard. i installed windows on my computer, but i lost the drivers cd. if you have,it please send it to: jussusu@yahoo.comMon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t156114-restarte_again_agianhello . i have NEC Galileo 845GL Socket 478 Motherboard same probliem auto shutdown and again start auto restarte no disply .i change my cooler cpu fan but still problium .Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t199283-manual_n4_ibfglI've been given a N4-IBFGL v2.1 Galileo 845GL motherboard but no manual. Can anyone help me by providing a copy or point me to where I can download one. OR tell me the front panel connections for LEDs, buttons etc.Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t220260-mother_board_not_working_properlydear sir/madam i have problem with my motherboard cpu fan just rotating and stopping the work but not displaying any thing.Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t371708-foxconn_motherboard_red_light_nothinghi, have bought a new board a foxconn 775 dual core when fitted i cant get anything to display let alone post, there is a red light that comes on but nothing else have checked for shortages etc double checked all leads etc but to no avail, has anyone...Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t409475-motherboardi loss my soltek motherboard driver cd snd i cant find the soltek motherboard model can you heelp me to find it's driver plz giveMon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t183224-update_boot_up_problem_versa_p600I submitted a bootup problem: "When I start up the system it tries to networkboot (4th in the boot up sequence). Using F2 for system utilities shows that the system doesn't think that it has a Primary master drive. Persevering with multiple...Mon, 07 Jul 2008 07:47:58 GMThttp://www.fixya.com/support/t391039-motherboard_driveri have a pentium 3 computer,the problem is my monitor always flicker what would i do? is it because i did not install the motherboard driver?i hve no motherbrd drver bcoz my computer was only gave my sister from japan.Mon, 07 Jul 2008 07:47:58 GMT