874 Products for KitchenAid Mixers
-
burntout motor on ksm150
Reg,Good question. The KSM90 motor is not interchangeable as the KSM90 units were solid state units and the KSM150 units are not....
Reg Daggett- Apr 10, 2012
- Mixers
- 1 Solution
-
is it perfectly safe to use a transformer for
Short answer- no problem, but please read on... First, economics are an issue- there is more than one way to convert...
TheSweet Stuff- Oct 19, 2011
- Mixers
- 1 Solution
-
where do i get a service manual?
http://www.kitchenaid.com/flash.cmd?/#/page/customer-service SM often are available on the 'net in PDF format, however...
annemcculloc- Sep 10, 2011
- Mixers
- 2 Solutions
-
The planetary assembly fell off
My wife has the same model and the planetary unit fell off shortly after we bought it. Since we had moved overseas to a remote...
-
beater hard to remove...oil leaking out of the
The agitater shaft that the beater attaches to is bent and needs to be replaced. It's easy to do . You should replace the...
-
My K5A 300watt Kitchenaid mixer only goes one
Get a copy of the Repair Part List for your model at Kitchenaid.com Download a Copy of the Kitchenaid Service manual....
jordancrober- Aug 14, 2011
- Mixers
- 1 Solution
-
Hi .. am in a
You need a Step Down Voltage Converter (also called a Voltage Transformer) which steps down 240, 230, 220 volts to 110 volts and...
siddharth_kh- Aug 4, 2011
- Mixers
- 1 Solution
-
I cannot remove the mixer attachment from the
Use a small amount of vegetable oil to lubricate the beater shaft and the beater. Slightly tap the beater up and sideways with a...
-
the slider on the right side of my mixerthat locks
Get a copy of the Repair Part List for your model at Kitchenaid.com. About one inch to the lower right of the Latch Lever (17) is...
mtblack716- Jul 31, 2011
- Mixers
- 2 Solutions
-
I have a KA k45ss
Obtain a copy of the Repair Part List for your model from Kitchenaid.com. You need to adjust the mixer speeds: Remove the screw...
v_domingosil- Jul 28, 2011
- Mixers
- 1 Solution
