http://www.fixya.com/support/jvc/receiversSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comMon, 21 Dec 2009 10:24:30 GMT80http://www.fixya.com/support/t2544211-everything_appears_normal_but_no_soundeverything appears normal but no sound, tried another speaker , still no sound jvc rx 552vMon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t1737289-jvc_rx6000vbk_not_get_signal_from_orMy JVC RX6000VBK does not get the signal from or send a signal to my subwoofer. The subs light is on but nothing. All other speakers are up and running fine. The light on the JVC showing if a signal is getting through is not coming on. All othe...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t1715233-overload_flashskeeps going in too overload when turned on with nothing hooked up too it overload flashs on the front screen what ic needs to be replaced as there is 5 in it can i unplug each one too see if that s the one that is puting it in too the overload thanksMon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t1629587-jvc_rx_9010vbk_receiver_premap_sectionA friend gave me a JVC RX-9010VBK DTS/5.1 surround-sound receiver that's a few years old. I carefully read the manual, and it seems to have an odd problem that is getting worse. When I turn it on from cold, either by remote or front panel, I hear...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t389556-jvc_rx_es1sl_5WHEN I SWITCH ON THE AMP THE MAIN DISPLAY DOES NOT LIGHT UP BUT THE RED DOT ON THE OTHER DISPLAY DOES ,NOTHING HAPPENS AND AFTER A FEW MOMENTS THE SYSTEM SHUTS ITSELF OFF HOPE YOU CAN HELP THANKS JOHNMon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t356164-jvc_rx_318need manual for jvc rx 318 dont know how to program the channelsMon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t207239-overloadThe overload message come on a shuts down the receiver when the volume is turned up. Receiver will come back on once system is turned off then on again, but volume levels are lower and system shuts down again at even lower volume. Is there a cooling...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t126748-reciever_shutting_downI've had my JVC RX-8010V receiver for 6 years now with no problems, until recently. Today it suddenly shut down and after turning it on again it shuts down several seconds later. I'm using a USB connection with my laptop and I use it for music...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t115544-jvc_rx_618v_sound_muffledAfter years of great listening, the sound coming from my receiver is muffled on all speakers including the center function. I have tested the speakers on another system and they work fine. Any suggestions?Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t68649-questions_re_jvc_rx_dv31_receiver_dvdI'm considering a small receiver/DVD combo. The JVC RX-DV31SL is one such example. Looks like it's deeply discounted at this point. Sells for a lot less than other such units (e.g., NAD L70, TEAC DRL-700) Questions: - Is it being closed...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t2036163-j_jvc_rx_558v_mute_light_always_notI have a J JVC RX-558V. The mute light is always on so it does not play sound. I can't find the key sequence on the front of the unit to disable Mute?Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t1828614-jvc_rx_888v_hook_up_cable_box_no_videoFirst, connect JVC HD-52Z585 Widescreen (video-1 input socket), with s-video cable to JVC RX-888V amplifier (monitor output socket). Connection is good because DVD displays picture through this set-up. Second, connect Pioneer BD-V110 cable box with...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t1649717-no_sound_out_subwoofernew t.v.cinema but no sound coming ourt of subwoofer,new system just bought it,have we connected wrong??helpMon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t582103-technicantmy jvc rx-717v receiver went pop hiss sizzle one day, so i took it to a technician to see what was the problem after a few days of collecting dust the technician informed me that it was dead.i took the remains home and while over it i found the...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t372566-stopped_workingThe unit was on and just stopped; it never went to read "overload" on the readout. Power remained to the standby switch but the LCD readout was off. Replaced blown 6.3 amp fuse but dead short on start. Disconnected 3 wire (2 grey; 1 orange) power...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t323809-jvc_rx_5032v_audio_vido_control_receiverHi, I have jvc rx-5032 audio/vido control receiver and i can not get off auto muting so there is no sound on FM is on if you could help me it would be great thank you dougMon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t276400-jvc_rx_884vbk_receiverThe LCD display quit working, along with the other components attached to the receiver, TV, speakers etc.. It does power on, but nothing else works. Any ideas?Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t158969-jvc_rx_6010v_overloadingfor the longest time i could play my music as loud as i wanted on surround sound then one day i am listing and it cuts out i look at the reciever and it says overload so i turn it off and turn it on and it starts playing again but not at the volume i...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t140037-jvc_rx6040_overload_troublejust got a used jvc rx6040 reciever and it continues to overload with the volume set to as low as "2". i have tried multiple speakers and get the same thing. it also "pops" in the speaker as i try to adjust the volume. the speakers i have tried are...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t114585-jvc_rx_809vHi, I've got this great receiver but can't seem to get the subwoofer working. I'm hooking up a Bose subwoofer that allows satellite speakers. I can only seem to get the satellites working when they are hooked up directly. My user manual has...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t3404340-receiver_will_sometimes_turn_itself_offThe receiver will sometimes turn itself off after about 10 seconds and it will continue doing this. Other times it will stay on and play ok. Any ideas?Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t1005830-power_upAfter working for about a year, my RX-D302B won't power up. It's plugged into the AC, in standby, but when attempting to turn it on, the blue light flashes for a second and goes off. This always happens whether using the remote control or the...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t894398-need_helpPlease Help ...I have no sound...I need a simple outline: how to connect ,set up and program my JVC RX-6020V 5.1 Audio/Video Control Reciever and my XL-FZ258 CompactDisc Automatic Changer For C.Ds ... It was working, then I moved, catalog lost ,no...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t349828-need_owners_manual_kenwoodneed owners manual for kenwood vr-507Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t324973-getting_no_audio_game_systems_pcFirst, I'm trying to hook both a Wii and an Xbox 360 up to this JVC RX-D302B receiver. I'm running the 360 through the dvd/dvr inputs and the Wii through the vcr inputs. I have a video cable running from the monitor output to my tv to complete the...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t140936-sub_wooferSub out not working, gives a low output volume. Is an Amp reqiured?Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t2823381-jvc_rx_8000v_sound_syncI can not get the sound and picture to syncMon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t2623168-cannot_seem_get_subwoofer_work_whenI cannot seem to get my subwoofer to work when I am running digital surround sound. It works fine when I am just running basic analog signal. What could the problem be?Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t1520024-rx_dp15b_reciever_turns_immediatelyIt was working last night, but when I tried to turn it on this morning, It turned on, then before it would play anything, it would go into standby mode, and the standby light is blinking, and I believe it's normally a solid glow. You can turn it on...Mon, 21 Dec 2009 10:24:30 GMThttp://www.fixya.com/support/t894981-power_surgesI had pretty serious power surge at my house and now my receiver will not turn on. ?I checked the small fuse at the power supply, but it is ok. ?What else can i do?Mon, 21 Dec 2009 10:24:30 GMT