<?xml version="1.0" encoding="us-ascii"?><rss version="2.0"><channel><title>Intel Routers Technical Support</title><link>http://www.fixya.com/support/intel/routers</link><description>Solved  technical support problems provided by FixYa users.</description><language>en-us</language><copyright>Copyright (c) 2007  FixYa, LTD.  All rights reserved.</copyright><webMaster>info@fixya.com</webMaster><pubDate>Sat, 05 Jul 2008 03:47:30 GMT</pubDate><ttl>80</ttl><item><title>SS101TX8EU &amp; SH100TX8EU</title><link>http://www.fixya.com/support/t172658-ss101tx8eu_sh100tx8eu</link><description>I have the following configuration :

SS101TX8EU with : 2 PC's with a PILA8461
 1 SR10TPSEU
 1 SE10TEU
 on another location

SH100TX8EU with : 5 PC's with a PILA8461.

I can't connect the SS101TX8EU &amp; SH100TX8EU, i tried every port on both
...</description><pubDate>Sat, 05 Jul 2008 03:47:30 GMT</pubDate></item><item><title>er9200 ip routing</title><link>http://www.fixya.com/support/t85146-er9200_ip_routing</link><description>I configure my er 9200 router on wan 1 pcmcia modem 
 
My router 1 address is 192.168.0.1 netmask 255.255.255.0 
 my router 2 address is 128.222.8.61 netmask 255.255.255.0 
 
a host with adress : 192.168.0.2 conncted to the lan port of router 1...</description><pubDate>Sat, 05 Jul 2008 03:47:30 GMT</pubDate></item><item><title>Building a NAT Table - ER9100 Router</title><link>http://www.fixya.com/support/t85141-building_nat_table_er9100_router</link><description>My router is presently configured &amp; communicating to the internet. 
 
I'm trying to build a NAT Table to translate my internal network IP-addresses 
 to a single internet address. ?My current configuration: 
 
IP Protocol on the 9100's Wan1 port...</description><pubDate>Sat, 05 Jul 2008 03:47:30 GMT</pubDate></item><item><title>8220 LAN port going dead</title><link>http://www.fixya.com/support/t85080-8220_lan_port_going_dead</link><description>I have two Intel 8220s talking over frame relay. ?After several hours of 
 usage the LAN port on one particular router goes dead. ?If I try to ping 
 another address from the router on it's local LAN I get '.-----' which seems 
 to be a problem...</description><pubDate>Sat, 05 Jul 2008 03:47:30 GMT</pubDate></item><item><title>ER9200 trying to use async. PC card for connect to X.25 net throught a public X.25 PAD</title><link>http://www.fixya.com/support/t85150-er9200_trying_use_async_pc_card_connect</link><description>One of ours resellers sold 25 ER9200 Intel Routers, and the customer (a Bank) is using them for its branches, connected by a X.25 public network. 
 The equipment is running OK. 
 But a Bank requirement is to have an async. backup line for connect...</description><pubDate>Sat, 05 Jul 2008 03:47:30 GMT</pubDate></item></channel></rss>