These errors, as referred to on Page 7-8 of the User's Manual, mean that the lifter mechanism of the paper tray has failed (X: 1 = Upper Tray, 2 =...
written by fastrepairguide
This error means that there is still sufficient memory to accommodate resource saving, but the current setting cannot be satisfied by the available...
written by fastrepairguide
This error means that a communications issue has occurred between the printer and a card installed in the printer's optional interface slot. Press...
written by fastrepairguide
This means that an error was detected on the optional memory board in the indicated slot. Verify that the correct revision level of memory is...
written by fastrepairguide
This means that the I/O card is not able to accept data. Print a self-test for more information. If an optional I/O interface is installed, refer to...
written by fastrepairguide
This means that a PostScript-specific error has occurred. Refer to the User's Manual for a listing. Most of these messages are eliminated if AUTO...
written by fastrepairguide
This message will be displayed when the wrong printer language (PCL5 or PostScript, for instance) is being used or a language other than PCL5 or...
written by fastrepairguide
This indicates an internal service error. Turn the printer off for 10 minutes and turn back on. If the error persists, consult service.
written by fastrepairguide
This means that there is not enough memory for the PostScript job to execute. Switch the printer off and add more memory or reduce the job size. In...
written by fastrepairguide
60.1 Error, 60.2 Error, 60.3 Error, 60.4 Error mean that an expansion memory card (SIMM) has been installed incorrectly (out of sequence) into the...
written by fastrepairguide