http://www.fixya.com/support/hotpoint/washing_machinesSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSat, 28 Nov 2009 05:28:07 GMT80http://www.fixya.com/support/t3283071-hotpoint_wf540_stopping_rinse_spinhotpoint wf540 stopping on a rinse and spin and on/off button flashing fast and reduce crease and mini load buttons flashing slow ?Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t3266889-error_f_05error F-05Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t3183865-hotpoint_vbxr1070_washer_tub_will_notMy Hotpoint VBXR1070 washer tub will not spin. The motor seems fine and spins, but the belt seems loose and has apparently been rubbing on the metal support housing. Is it possible that the belt has stretched out and needs to be replaced?Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t3143980-all_lights_flashing_hotpoint_wf541gCan you tell me why,sometimes, when i turn on my Hotpoint WF541G washing machine, all lights flash for up to a few minutes before I can start the machine program? Should I not continue to use the machine? Thanks Clare RobinsonSat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t3125559-f_08_error_message_hotpoint_washingF-08 error message on Hotpoint Washing machine WT761? The original fault on the machine was that it was tripping out and taking out a resetable fuse in my fuse box a few seconds after turning the machine on. This happened several times without...Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t3106532-change_door_boot_seal_hotpoint_aquariusHow do I change the door boot seal on a Hotpoint Aquarius WMA31N washing machine?Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t3088194-remove_replace_new_door_sealhow do I remove and then replace a new door seal on my hotpoint WD420 washer / dryerSat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t3080545-hotpoint_wma50_1000spin_not_pumping_outMy Hotpoint wma50 1000spin is not pumping out all the waterSat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t3012914-hotpoint_cleared_filter_but_f11_showshotpoint cleared filter but f11 shows what can i do to solve thisSat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t3002545-filter_onwma56where is the filterSat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2992804-filter_hotpoint_wma54_washingwhere is the filter on the hotpoint wma54 washing machine?Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2885380-remove_drum_from_hotpoint_wm64How to I remove the drum from a Hotpoint WM64 washing machine? I need to change the bearings.Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2832785-filter_hotpoint_wf860_washerwhere is the filter on a hotpoint wf860 washerSat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2784245-hotpoint_wd72_keepshotpoint wd72 - Keeps "close door" message up, wont turn off. Did trip switch and went bang when turned on! black mark by door handle!Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2732010-washing_machine_aquarius_wf640_keepsI have just put the belt back on + it worked twice but on some programmes it keeps showing the code f-02. Does anyone have any idea what it is. Thank you xSat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2643721-drum_not_turningMy WMA40 has just decided to stop turning the drum. Belt is OK. I've fitted new brushes. Assembled it all again but drum still won't turn. I've been told it could be the motor or the control module, but how to find out which! The machine is only 5...Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2554523-hotpoint_door_not_lockingHi, I have a hotpoint WMA34 It recently blow the fuse after starting a wash, I fitted a new fuse and it lets me open the door but still has water in the drum but the door light is flashing when i close it and reset. I have fitted a new door interlock...Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2536843-filterWHERE IS THE FILTER FOR THE HOTPOINT WMA64? THE MACHINE KEEPS LEAVING SLUDGY DEPOSITS ON THE CLOTHES. IT IS A MACHINE LEFT IN THE HOUSE AND WE HAVE NO MANUAL. CANT FIND AN OPENING ON THE FRONTSat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2533228-filter_located_washingWhere is the filter located on the washing machine?Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2489947-change_brushes_wma35_hotpointhow do i change the brushes on my wma35 hotpoint washing machine so that it'll spin?Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2457587-very_noisey_spin_cyclemakes a lot of noise when on spin, have to shout to be heard over it.Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2435202-hotpoint_washing_machine_leaks_soaphotpoint washing machine leaks at soap drawerSat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2407647-fit_new_belt_hotpoint_wf430_washingTHE MOTOR HAS NO PLAY ON IT,SO I CANT GET THE BELT ON SLACK AND THEN TIGHTEN IT UPSat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2374049-wma74_hotpoint_wm_door_will_not_openMy wma74 Hotpoint WM door will not openSat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2298608-hotpoint_ultima_super_silent_w_f_840My hotpoint ultima super silent washing machine model no: WF840 shows fault 03, Any ideas as to what is wrong and how much it will cost to fix?Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2040562-hotpoint_few10_washing_machine_wontmy hotpoint few10 washing machine wont work,it wont come on at all and none of the lights at the front come onSat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t2002290-hotpoint_first_edition_washing_machinehotpoint first edition washing machine door will not open after completing its full cycleSat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t1806441-fabric_compartment_always_full_waterAfter every wash I have to empty water from the fabric conditioner compartment. I have tried cleaning it out but that does not workSat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t1761684-water_wont_drain_or_spin_wf210_hotpointthe machine works fine until it comes to the rinse and spin cycle, and then it just stops working and the lights start to flash.Sat, 28 Nov 2009 05:28:07 GMThttp://www.fixya.com/support/t1678553-hotpoint_bwm129_super_silent_1200_spinI have the hotpoint BWM129 super silent 1200 spin, recently the machine has stopped draining water even after spin cycle has finished , I also have constantly flashing lights which are super wash and delay start and i can not turn off the machineSat, 28 Nov 2009 05:28:07 GMT